曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  in the NLG, MLG and CLG wheel-well bays. 
R  (3) Protection of the wheels 
R  (a) We recommend to install used tires or wheels with used tires: 
R  - on the nose landing gear (Ref. TASK 32-41-12-400-001) 
R  - on the main landing gear (Ref. TASK 32-41-11-400-006) 
R  (b) Lubricate the bearings with COMMON GREASE (Material No. 04-001). 
R  (c) Make sure that there is no corrosion on the brakes and on each 
R  half wheel (Ref. TASK 32-40-00-200-001). 
R  (d) Remove the debris guard, the impeller and the shroud of the brake 
R  fans (Ref. TASK 32-48-51-000-005). 
R  - Apply SPECIAL MATERIALS (Material No. 05-027) on the removed 
R  parts. 
R  (e) Do a check of the tire pressures (Ref. TASK 32-41-00-210-003). 
R  (f) Protect the brakes and the wheels with STORAGE PRESERVATION 
R  (Material No. 15-002). 
R  **ON A/C ALL
 Subtask 10-12-00-550-052
 D. Protection of the Water and Toilet System
 (1) Protection of the potable water system
 (a) If the storage period is more than 2 days:
 - drain, flush and dry the system if necessary (Ref. TASK 12-24-
38-680-001).
 (2) Protection of the toilet system
 (a) If the storage period is more than 2 days:
 - drain, flush and disinfect the system if necessary (Ref. TASK
 12-16-38-613-001).

 

 Subtask 10-12-00-281-053

 E. Protection of the fuel system
 (1)
 Do a fuel sampling for microbiological contamination (Ref. TASK 12-32-28-281-003) or (Ref. TASK 12-32-28-281-004).

 (2)
 If you find contamination:

 (a)
 Do a shock treatment:

 -
if fuel premixed with biocide is available (Ref. TASK 28-11-00-600-004) or (Ref. TASK 28-11-00-600-004).

 -
if fuel premixed with biocide is not available (Ref. TASK 28-11-00-600-004) or (Ref. TASK 28-11-00-600-004).

 

 (b)
 Do a preventive treatment:

 

 (3)
 If you do not find contamination:

 (a)
 If fuel premixed with biocide is available:

 -
Refuel the wing tanks to 30% of the total capacity with premixed fuel with biocide (Ref. TASK 28-11-00-600-007) or (Ref. TASK 28-11-00-600-007).

 -
Refuel the center tank to 30% of the total capacity with fuel premixed with biocide (Ref. TASK 28-11-00-600-007) or (Ref. TASK 28-11-00-600-007).

 

 (b)
 If fuel premixed with biocide is not available:

 

 1_ If premixed fuel is available:
 - Refuel the wing tanks to 90% of the total capacity with fuel
 premixed with biocide (Ref. TASK 28-11-00-600-007) or
 (Ref. TASK 28-11-00-600-007).
 - Refuel the center tank to 30% of the total capacity with
 fuel premixed with biocide (Ref. TASK 28-11-00-600-007) or
 (Ref. TASK 28-11-00-600-007).
 2_ If premixed fuel is not available:
 - Refuel the wing tanks to 90% of the total capacity with fuel
 not premixed with biocide (Ref. TASK 28-11-00-600-007) or
 (Ref. TASK 28-11-00-600-007).
 - Refuel the center tank to 30% of the total capacity with
 fuel not premixed with biocide (Ref. TASK 28-11-00-600-007)
 or (Ref. TASK 28-11-00-600-007).

 -Refuel the wing tanks to 30% of the total capacity with fuel not premixed with biocide (Ref. TASK 28-11-00-600-007) or (Ref. TASK 28-11-00-600-007).
 EFF : ALL  10-12-00Page 216   May 01/05R   CES

 -Refuel the center tank to 30% of the total capacity with fuel not premixed with biocide (Ref. TASK 28-11-00-600-007) or (Ref. TASK 28-11-00-600-007).
 (4) Drain water from all the fuel tanks (Ref. TASK 12-32-28-281-001)
 NOTE : Do the water drain procedure one hour after refueling is
____
 completed.

 (5) Close all the fuel system valves.
 Subtask 10-12-00-620-074
 F. Protection of the Flight Controls
 (1) Lubricate:
 -
the mechanical control chains of the THS (Ref. TASK 12-22-27-640-007)

 -
the THS-actuator ball-screw nut (Ref. TASK 12-22-27-640-003)

 -
the rudder bearings No. 6 (Ref. TASK 12-22-55-640-001)

 -
the trimmable horizontal stabilizer bearings and attachment fittings (Ref. TASK 12-22-53-640-001)

 -
the roller bearings of the flap tracks (Ref. TASK 12-22-27-640-004)

 -
the roller and the pinion bearings of the slat tracks (Ref. TASK 12-22-27-640-006)
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PARKING, MOORING, STORAGE & RETURN TO S(25)