(6)
Do an engine run-up for the two engines (Ref. TASK 71-00-00-710-006).
(7)
Stop the engines (Ref. TASK 71-00-00-710-028).
(8)
After shutdown, do a check of the engines for oil, hydraulic and fuel leakage.
Subtask 10-30-00-710-133
T. Test of the Bleed System
(1) Do a test of the bleed system (Ref. TASK 36-11-00-710-003).
**ON A/C 001-049, 051-061, 101-105, 201-203, 301-399,
Subtask 10-30-00-710-128
U. Protection of the Flight Controls
(1)
Do the lubrication of:
-
the mechanical control chains of the THS (Ref. TASK 12-22-27-640-007)
-
the THS actuator ball screw nut (Ref. TASK 12-22-27-640-003)
-
the rudder bearings No. 6 (Ref. TASK 12-22-55-640-001)
-
the trimmable horizontal stabilizer bearings and attachment fittings (Ref. TASK 12-22-53-640-001)
-
the roller bearings of the flap tracks (Ref. TASK 12-22-27-640-004)
-
the roller and the pinion bearings of the slat tracks (Ref. TASK 12-22-27-640-006)
-all the spoiler servo-control bearings (Ref. TASK 12-22-27-640-005).
(2)
Clean and put protection on the flight control cables (Ref. TASK 20-24-11-100-001).
(3)
Do a detailed inspection of the flat transmission assy (Ref. TASK 27-54-00-200-001).
(4)
Do a detailed inspection of the slat transmission system (Ref. TASK 27-84-00-200-001).
R (5) Apply grease to the flap rotary actuators (Ref. TASK 12-22-27-640-R 008).
(6)
Do a check of the fluid level of the flap power-control-unit, if necessary fill the PCU with oil (Ref. TASK 12-13-27-612-002).
(7)
Do a check of the fluid level of the slat power-control-unit, if necessary fill the PCU with oil (Ref. TASK 12-13-27-612-003).
(8)
Do a test of the spoiler hydraulic control (Ref. TASK 27-64-00-710-001).
(9)
Do a test of the aileron and its hydraulic control (Ref. TASK 27-14-00-710-001).
(10)
Do a test of the elevator and its hydraulic control (Ref. TASK 27-34-00-710-001).
(11)
Do a test of the rudder hydraulic actuation (Ref. TASK 27-24-00-710-
002).
(12)
Do a test of the flap and slat system (Ref. TASK 27-54-00-710-001). Operate the flap system a minimum of ten times.
R **ON A/C 062-099, 106-149, 151-199, 204-299, 401-499,
Subtask 10-30-00-710-128-A
U. Protection of the Flight Controls
(1)
Do the lubrication of:
-
the mechanical control chains of the THS (Ref. TASK 12-22-27-640-007)
-
the THS actuator ball screw nut (Ref. TASK 12-22-27-640-003)
-
the rudder bearings No. 6 (Ref. TASK 12-22-55-640-001)
-
the trimmable horizontal stabilizer bearings and attachment fittings (Ref. TASK 12-22-53-640-001)
-
the roller bearings of the flap tracks (Ref. TASK 12-22-27-640-004)
-
the roller and the pinion bearings of the slat tracks (Ref. TASK 12-22-27-640-006)
-all the spoiler servo-control bearings (Ref. TASK 12-22-27-640-005).
(2)
Clean and put protection on the flight control cables (Ref. TASK 20-24-11-100-001).
(3)
Do a detailed inspection of the flat transmission assy (Ref. TASK 27-54-00-200-001).
(4)
Do a detailed inspection of the slat transmission system (Ref. TASK 27-84-00-200-001).
R (5) Drain and fill the flap rotary actuators (Ref. TASK 12-13-27-612-R 005).
(6)
Do a check of the fluid level of the flap power-control-unit, if necessary fill the PCU with oil (Ref. TASK 12-13-27-612-002).
(7)
Do a check of the fluid level of the slat power-control-unit, if necessary fill the PCU with oil (Ref. TASK 12-13-27-612-003).
(8)
Do a test of the spoiler hydraulic control (Ref. TASK 27-64-00-710-001).
R R (9) Do a test of the aileron and its hydraulic control (Ref. TASK 27-14-00-710-001).
R R (10) Do a test of the elevator and its hydraulic control (Ref. TASK 27-34-00-710-001).
R R (11) Do a test of the rudder hydraulic actuation (Ref. TASK 27-24-00-710-002).
R R (12) Do a test of the flap and slat system (Ref. TASK 27-54-00-710-001). Operate the flap system a minimum of ten times.
R **ON A/C ALL
Subtask 10-30-00-710-129
V. Tests of the Ice Protection Systems
(1) Do a test of the wing ice-protection system (Ref. TASK 30-11-00-710-001).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PARKING, MOORING, STORAGE & RETURN TO S(52)
