1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
26-21-00-810-801 The SQUIB Legend of the ENG 1/AGENT 1 Pushbutton
Switch does not Come on
26-21-00-810-802 The SQUIB Legend of the ENG 1/AGENT 2 Pushbutton
Switch does not Come on 75-41-00-810-805 High Nacelle Temperature Indication on Engine 1 R AMM 26-12-00-710-001 Operational Check of Loop/Squib
AMM 26-12-00-710-002 Operational Test of the Engine Fire and Overheat Detection with the Centralized Fault Display System (CFDS)
AMM 26-21-41-000-001 Removal of the Engine Fire-Extinguisher Bottle (6WE1,8WE1,6WE2,8WE2) AMM 26-21-41-400-001 Installation of the Engine Fire-Extinguisher Bottle (6WE1,8WE1,6WE2,8WE2)
3. Fault Confirmation
__________________
A. Do an inspection of the engine for signs of fire damage.
4. Fault Isolation
_______________
A. If you find signs of fire damage:
(1) Put the engine back to its initial condition.
(2) Replace the engine fire-extinguisher bottles (Ref. AMM TASK 26-21-41-000-001) and (Ref. AMM TASK 26-21-41-400-001).
(3) Do the test given in Para. 4.C.
B. If you do not find signs of fire damage:
- make sure that there is no nacelle overheat (Ref. TASK 75-41-00-810-805).
(1) If there was a nacelle overheat:
- repair and put the engine back to its initial condition
- replace the engine fire-extinguisher bottles (Ref. AMM TASK 26-21-41-000-001) and (Ref. AMM TASK 26-21-41-400-001)
- do the test given in Para. 4.C.
(2) If there was not a nacelle overheat:
- repair the fire protection system (Ref. TASK 26-21-00-810-801) and (Ref. TASK 26-21-00-810-802)
- replace the engine fire-extinguisher bottles (Ref. AMM TASK 26-21-41-000-001) and (Ref. AMM TASK 26-21-41-400-001)
- do the test given in Para. 4.C.
C. Test
- do the operational test of the fire protection system (Ref. AMM TASK 26-12-00-710-001) and (Ref. AMM TASK 26-12-00-710-002).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞26-21-00∞∞∞∞∞∞∞∞∞∞Page 240
May 01/04R
CES Possible Engine 2 Fire or Detection System Failure
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
26-21-00-810-803 The SQUIB Legend of the ENG 2/AGENT 1 Pushbutton
Switch does not Come on
26-21-00-810-804 The SQUIB Legend of the ENG 2/AGENT 2 Pushbutton
Switch does not Come on 75-41-00-810-806 High Nacelle Temperature Indication on Engine 2 R AMM 26-12-00-710-001 Operational Check of Loop/Squib
AMM 26-12-00-710-002 Operational Test of the Engine Fire and Overheat Detection with the Centralized Fault Display System (CFDS)
AMM 26-21-41-000-001 Removal of the Engine Fire-Extinguisher Bottle (6WE1,8WE1,6WE2,8WE2) AMM 26-21-41-400-001 Installation of the Engine Fire-Extinguisher Bottle (6WE1,8WE1,6WE2,8WE2)
3. Fault Confirmation
__________________
A. Do an inspection of the engine for signs of fire damage.
4. Fault Isolation
_______________
A. If you find signs of fire damage:
(1) Put the engine back to its initial condition.
(2) Replace the engine fire-extinguisher bottles (Ref. AMM TASK 26-21-41-000-001) and (Ref. AMM TASK 26-21-41-400-001).
(3) Do the test given in Para. 4.C.
B. If you do not find signs of fire damage:
- make sure that there is no nacelle overheat (Ref. TASK 75-41-00-810-806).
(1) If there was a nacelle overheat:
- repair and put the engine back to its initial condition
- replace the engine fire-extinguisher bottles (Ref. AMM TASK 26-21-41-000-001) and (Ref. AMM TASK 26-21-41-400-001)
- do the test given in Para. 4.C.
(2) If there was not a nacelle overheat: 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 FIRE PROTECTION 防火(107)
