(b)  
Pull the module from the panel carefully to prevent wire bundle damage.

 S 024-068
 (7)  LEFT (M7261) OR CENTER (M7263) CONTROL MODULE;
 Remove the control:

 (a)  
Remove the nut that attaches the control to the module panel.

 (b)  
Examine the wire and the control terminal configuration for the connection sequence.

 (c)  
Remove the wires from the control.

 (d)  
Remove the control.

 S 034-075
 (8)  RIGHT CONTROL MODULE (M7262); Disconnect the electrical connector from the rear of the module.
 TASK 33-11-04-404-043
 5.  P5 Panel Controls Installation (Pilots Panel Lights)____________________________________________________
 A. References
 (1)  24-22-00/201, Manual Control
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 33-11-04
 ALL  ú ú 01 Page 406 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
LEFT (M7261) OR CENTER (M7263) CONTROL MODULE;
 IPC 33-11-04

 (3)  
RIGHT CONTROL MODULE (M7262);
 IPC 31-12-11 Fig 2
 IPC 33-11-10 Fig 1
 IPC 33-41-00 Fig 10
 IPC 33-43-00 Fig 10
 IPC 33-44-00 Fig 10
 IPC 33-45-00 Fig 10

 (4)  
LEFT (M7261) OR CENTER (M7263) CONTROL MODULE;
 SSM 33-11-03
 SSM 33-11-04

 (5)  
RIGHT CONTROL MODULE (M7262);
 SSM 33-12-01
 SSM 33-41-10
 SSM 33-43-10
 SSM 33-44-01
 SSM 33-44-02
 SSM 33-45-10

 B. Access
 (1)  Location Zone
 200 Flight Compartment

 C. Procedure
 S 424-069
 (1)  LEFT (M7261) OR CENTER (M7263) CONTROL MODULE;
 Install the control:

 (a)  
Connect the electrical wires to the new control.

 (b)  
Put the control shaft into the panel hole from the rear side.

 (c)  
Install the nut that attaches the control to the module panel.

 S 434-076
 (2)  
RIGHT CONTROL MODULE (M7262); Connect the electrical connector to the rear of the module.

 S 424-070

 (3)  
Install the module:

 (a)  
Put the module in the panel carefully to prevent wire bundle damage.

 (b)  
Tighten the screws that attach the module to the panel.

 S 434-071
 (4)  Install the lightplate:
 (a)  
Set the lightplate in its position on the module.

 (b)  
Install the screws that attach the lightplate to the module.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 33-11-04
 ALL  ú ú 01 Page 407 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 434-048
 (5)  LEFT (M7261) OR CENTER (M7263) CONTROL MODULE; Install the control knob:
 (a)  
Put the control knob on the control shaft.

 (b)  
Tighten the set screws on the control knob.

 S 864-049
 (6)  For controls on the left control module (M7261), close these circuit breakers and remove the DO-NOT-CLOSE tags:
 (a)  P6 Main Power Distribution Panel
 1) 6E27 FLT DK LIGHTS FLOOD GLARE SHIELD
 2) 6F24 FLT DK LIGHTS DOME
 3) 6L1 FLT DECK LIGHT STBY INST
 4) 6L3 FLT DECK LIGHT STORM
 5) 6E20 FLT DK LIGHTS PANEL OVHD
 6) 6E21 FLT DK LIGHTS PANEL GLARE SHIELD
 7) 6E24 FLT DK LIGHTS PANEL OVHD P7
 8) 6D19 P5 PB SW LTS

 S 864-050
 (7)  For controls on the middle control module (M7263), remove the DO-NOT-CLOSE tags and close these circuit breakers:
 (a)  
P6 Main Power Distribution Panel
 1) 6E22 FLT DK LIGHTS PANEL CONT STAND
 2) 6L1 FLT DECK LIGHT STBY INST
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燈 LIGHTS(13)