clear of the base assembly. 3) Push up on the diode/fuse card assembly to remove it. 4) Remove and keep the cover from the diode/fuse card.
(b)
Install the new diode/fuse card. 1) Install the cover on the new diode/fuse card. 2) With the index points aligned, put the diode/fuse card
assembly into the drawer assembly. 3) Carefully push down the front end of the diode/fuse card assembly until you hear a click.
S 432-059
(4) Carefully push in the lens cap assembly.
(a)
Turn up the lens cap.
(b)
Push the lens cap assembly straight back until it locks into its position.
S 862-021
(5) Close these circuit breakers and remove the DO-NOT-CLOSE tags:
(a) P6 Main Power Distribution Panel
1) 6F19 FLT DK LIGHTS PILOTS MISC IND 1
2) 6F20 FLT DK LIGHTS PILOTS MISC IND 2
3) 6F26 FLT DK LIGHTS F/O IND
4) 6F27 FLT DK LIGHTS F/O IND & DIG DISP
5) 6L4 FLT DK LIGHT CAPT IND
6) 6L5 FLT DK LIGHT CAPT IND & DIG DISP
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
33-12-02
ALL ú ú 01 Page 205 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 712-022
(6) Do a test of the indicator light:
(a)
Supply electrical power (Ref 24-22-00/201).
(b)
Put the IND LTS switch on the P5 panel to the TEST position.
(c)
Make sure the indicator light with the new diode/fuse card comes on.
(d)
Put the IND LTS switch to the BRT position.
(e)
Remove electrical power if it is not necessary (Ref 24-22-00/201).
TASK 33-12-02-002-035
4. Indicator Light Removal (Fig. 201)_______________________
A. References
(1)
24-22-00/201, Manual Control
(2)
SSM 33-12-01
B. Access
(1) Location Zone 200 Flight Compartment, Pilots' Instrument Panels
C. Removal Procedure
S 862-036
(1)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a) P6 Main Power Distribution Panel 1) 6F19 FLT DK LIGHTS PILOTS MISC IND 1 2) 6F20 FLT DK LIGHTS PILOTS MISC IND 2 3) 6F26 FLT DK LIGHTS F/O IND 4) 6F27 FLT DK LIGHTS F/O IND & DIG DISP 5) 6L4 FLT DK LIGHT CAPT IND 6) 6L5 FLT DK LIGHT CAPT IND & DIG DISP
(2)
Get access to the rear of the indicator.
S 032-038
(3)
Disconnect the electrical wires from the contacts on the rear of the indicator light.
S 012-037
(a) Use the correct tool from table 201.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
33-12-02
ALL ú ú 01 Page 206 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
~.................................................................. | CONTACT WIRE | TOOL PART | | BARREL SIZE | NUMBER | .................................................................... | 22 | M83723/31-20 | .................................................................... | 20 | M83723/31-20 | .................................................................... | 16 | M83723/31-16 | .................................................................... | 12 | M83723/31-12 | 2...................................…..............................1
Insertion/Removal Tools Table 201
(b) Identify the wires to aid during the installation of the indicator light.
S 022-072
CAUTION:_______USE ONLY YOUR FINGERS TO PULL OUT THE LENS CAP ASSEMBLY. TOOLS CAN CAUSE DAMAGE TO THE LENS CAP.
(4) Carefully pull out the lens cap assembly.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 燈 LIGHTS(27)
