曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

D. Procedure
 S 422-141-N00
 (1)  Install the light for the fuel control switch.
 (a)  Install a new light in the cap with light pressure from one finger.
 NOTE: The light will make clicks when it is in the retainers.
____
 (b)  
Align the key in the cap with the key slot in the control switch lever.

 (c)  
Carefully push the cap down and turn it clockwise to put the cap on the control switch lever.

 (d)  
Do this procedure: Energize the Fuel Control Toggle Switches.

 TASK 76-11-03-002-029-N00
 16. Remove the Engine Start Module
______________________________
 A. General
 (1)  This task gives access to the fuel control toggle switches and the stabilizer trim switches in the engine start module.
 B. References
 (1)  IPC 76-11-03 Fig. 3
 C. Access
 (1)  Location Zone
 221 Control Cabin, LH
 222 Control Cabin, RH

 D. Procedure
 S 862-171-N00
 (1)  
Do this task: Remove the Electrical Power from the Fuel Control Toggle Switches.

 S 012-030-N00

 (2)  
Remove the lightplate for the engine start module.

 (a)  
Remove the five screws from the lightplate.

 (b)  
Remove the four fuel control switch knobs.

 (c)  
Disconnect the lightplate wire from the engine start module.

 (d)  
Remove the lightplate.

 

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 76-11-03
 ALL  ú ú N02 Page 217 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE  A  MODULE LIGHTPLATE ENGINE START 
(5 LOCATIONS) SCREW 
(2 LOCATIONS) ENGINE START MODULE SCREW 

A
Control Stand - Engine Start Module Installation Figure 205
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 76-11-03
 ALL  ú ú N01 Page 218 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
SEE A LEVER RAIL SCREW (3 LOCATIONS)
LEVER
RAIL SCREW
(3 LOCATIONS)

THRUSTLEVER RAIL
A
Control Stand - Thrust Lever Rails Installation Figure 206
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 76-11-03
 ALL  ú ú N01 Page 219 ú Oct 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
MICROSWITCH PACK ASSEMBLY
SEE A 
PACK ASSEMBLY MICROSWITCH 
START MODULE ENGINE  PACK ASSEMBLY TO THE MICROSWITCH 

ATTACHED TO THE CONTROL STAND FRAME GROUND PLATE
FLAP LEVER RVDT
Control Stand - Electrical Cable Installation
Figure 207 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 76-11-03
 ALL  ú ú N01 Page 220 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
NUT
FUEL
LOCKWASHER
CONTROL
(4 LOCATIONS)
SWITCH
KEYING WASHER
(4 LOCATIONS

A

Control Stand - Electrical Cable Installation
Figure 207 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 76-11-03
 ALL  ú ú N01 Page 221 ú Oct 10/97
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機控制 ENGINE CONTROLS(29)