74-21-02
ALL ú ú N01 Page 605 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
(f) If there were problems with the ignition system, do one of the steps that follow to make sure the igniter guide is there. 1) Remove the other igniter plug to compare each inner
diameter of the opening in the combustion chamber where the igniter plug is installed. a) If the diameters are not the same, the igniter guide is
gone.
2) Measure the inner diameter of the opening in the combustion chamber where the igniter plug is installed. a) If the inner diameter is too large, the igniter guide
is gone.
NOTE: The diameter of the igniter guide is 0.566-0.576
____ inch (14.38-14.63 mm), and the inner diameter of the opening without the igniter guide is 0.890-0.920 inch (22.61-23.37 mm).
(g) If the igniter guide is gone, do a borescope inspection of the 1st-stage HPT blades (AMM 72-00-00/601). 1) If the 1st-stage HPT blades are satisfactory, replace the
igniter boss with an igniter boss and guide assembly (AMM 74-21-02/801).
NOTE: See your local Pratt & Whitney representative to get
____ the igniter boss and guide assembly.
2) If the HPT Blades are not satisfactory, replace the engine (AMM 71-00-02/401).
S 426-008-N00
(2) Install the igniter plug (AMM 74-21-02/401).
TASK 74-21-02-206-009-N00
3. Immersion Depth Check of the Igniter Plug
_________________________________________
A. Special Tools and Equipment
(1) PWA 75509 - Immersion Gage, Pratt & Whitney, Commercial Products Division, 400 Main Street, East Hartford, CT 06108
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
74-21-02
ALL ú ú N01 Page 606 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
EXCITER-TO-IGNITER
PLUG CABLE (REF)
IGNITER PLUG
(UPPER)
SEE B C
DIFFUSER/COMBUSTOR SEE A
CASE (REF)
SEE IGNITER PLUG (LOWER) B C
PUMP (REF) HYDRAULIC CLASSIFIED SPACERS
IGNITER PLUG BOSS
FWD
A TAB WASHER
IGNITER PLUG
B
Igniter Plug Immersion Depth Check Figure 602 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
74-21-02
ALL ú ú N01 Page 607 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
GAGE
HOOK
DIMENSION X
Igniter Plug Immersion Depth Check
Figure 602 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
74-21-02
ALL ú ú N02 Page 608 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(2)
PWA 24524 - Chasing Tap, Pratt & Whitney
(3)
PWA 27641 - Chasing Tap, Pratt & Whitney
B. Consumable Materials
(1)
B00782 Solvent - Trichlorotriflourethane, MIL-C-81302
(2)
D00009 Compound - Antiseize, MIL-M-7866, Powdered Molykote Type Z
(3)
D00373 Lubricant - Thread, PMC 9936, Parker Thread Lube
(4)
D00390 Oil - Engine
(5)
G00834 Cloth - Cotton, Lint-free
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 點火 IGNITION(28)
