曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 D.  Leading flanges of the cascade vanes are attached with bolts to the torque box; aft flanges are attached with bolts to the cascade support ring.
 6.  Tension Latches (Fig. 6)
_______________
 A.  Four tension latches are used to attach two thrust reverser halves together. Two tension latches are accessible behind the louvered exhaust door in the lower bifurcation area. The aft tension latch is installed to the rear of the louvered exhaust door. The forward tension latch is installed on the lower forward surface of the torque box.
 B.  The forward nonadjustable tension latch is installed in the lower torque box of the right reverser half and engages an adjustable keeper eyebolt on the left half. The remaining three tension latches use individual adjustment wheels to move the latch hooks. These three tension latches are installed on the right thrust reverser and engage bolts set in the structure of the left thrust reverser.
 7.  Latch Band (Fig. 7)
__________
 A.  The latch band includes an anchor strap above the fan case, two latch bands (one for each thrust reverser) and a T-bolt clevis for the right thrust reverser and a T-bolt latch handle for the left thrust reverser. The anchor strap is not connected to the fan case; it only connects the two latch bands together.
 B.  The T-bolt (or barrel nut) for the latch band fits into a claw type clevis bracket on the right latch band; the T-bolt is adjustable to control the closing force for the latch handle.
 C.  The latch band holds the outer forward edge of the thrust reversers to the aft flange of the fan case. It transmits reverser loads into the fan frame and not to hinges on the strut.
 8.  Louvered Exhaust Door (Fig. 6)
_____________________
 A.  The louvered door is an exit for accessory compartment cooling air and an access to two fixed structure latches. The louvered door is installed at the aft bottom of fan duct cowl and the thrust reverser. The exhaust door is normally closed but can be left open during ground operation of the power plant for ease of routing test instrumentation lines.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 78-31-00
 ALL  ú ú N01 Page 11 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
OVERBOARD DRAIN (REF)
SEE A
SEE C LOUVERED EXHAUST DOOR
FWD SEE B
A
ADJUSTABLE
5/8-INCH NUT LOUVERED
EXHAUSTLATCH DOORHOOK
KNURLED
ADJUSTMENT
WHEEL

LATCH LATCH HOOK
HANDLE
LATCH HANDLE
AFT TENSION LATCH AFT TENSION LATCH
WITH KNURLED ADJUSTMENT WHEEL WITH 5/8-INCH ADJUSTMENT NUT

B B
Tension Latches
Figure 6 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 78-31-00
 ALL  ú ú N01 Page 12 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
HOOK  EYEBOLT ANTI ROTATION STOP DSEE STARWHEEL BODY  A 
A 
LATCH CLOSING FORCE 90` TRAVEL POSITION IN OPEN FREE LATCH HANDLE  WRENCH ALLEN  TENSION LATCH FORWARD NONADJUSTABLE STARWHEEL 
A-A  TENSION RELEASE LATCH  TORQUE BOX  C  FWD 
HOOK LATCH EYEBOLT KEEPER TENSION 
STOP ROTATION ANTI  GUIDE PIN  BODY 
B  B  STARWHEEL KEEPER ALLEN WRENCH 
BODY KEEPER  WRENCH ALLEN 
D  B-B 
Figure 6 (Sheet 2) Tension Latches 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 78-31-00
 ALL  ú ú N01 Page 13 ú Jun 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE B
THRUST REVERSER TORQUE BOX  LATCH BAND 
SEE A 
FWD 
RETAINER ANCHOR STRAP  A  SEE  C 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 1(32)