(2)
32-00-15/201, Landing Gear Door Lock
(3)
32-00-20/201, Landing Gear Downlocks
C. Access
(1) Location Zones
211/212 Flight Compartment
710 Nose Landing Gear and Doors
D. Prepare for Removal
S 864-002
(1)
Make sure that the landing gear downlocks are installed (Ref 32-00-20).
(2)
Open the nose gear doors.
(3)
Install the door locks (Ref 32-00-15).
S 864-022
(4)
Open these circuit breakers on the overhead circuit breaker panel, P11, and attach DO-NOT-CLOSE tags:
(a)
11A32, INDICATOR LIGHTS 1
(b)
11C23, INTERPHONE CABIN SERVICE
(c)
11H31, GND CALL
S 014-003
S 494-021
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
23-43-01
ALL ú ú 01 Page 401 ú Jan 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 034-009
CAUTION:_______ WHEN THE AURAL WARNING IS REMOVED, MAKE SURE THAT THE
EQUIPMENT COOLING SYSTEM OPERATES CORRECTLY. MAKE CHECKS
FOR EQUIPMENT COOLING FAILURE MESSAGES ON THE EICAS
SCREENS EVERY 15 MINUTES. COOLING FAILURES CAN CAUSE
DAMAGE TO EQUIPMENT.
CAUTION:_______ IF THE AIRPLANE IS ON BATTERY POWER, MAKE SURE THAT THE
IRS MODE SELECT SWITCHES ARE SET TO OFF. FAILURE TO DO
THIS CHECK CAN CAUSE A DECREASE IN BATTERY POWER.
(5) Remove the pilots' call panel (M51) (Ref 23-42-02). NOTE: The equipment cooling and inertial reference systems can
____ cause the ground crew call horn to operate unless prevented by the removal of the pilots' call panel.
GROUND CREW CALL HORN
Ground Crew Call Horn Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
23-43-01
ALL ú ú 01 Page 402 ú Mar 20/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
E. Remove the Ground Crew Call Horn
S 034-006
(1)
Remove the three screws that hold the horn.
S 034-007
(2)
Remove the electrical leads from the horn terminals.
(a) Identify the leads and terminals for installation.
S 024-008
(3) Remove the ground crew call horn.
TASK 23-43-01-404-010
3. Install the Ground Crew Call Horn (Fig. 401)
_________________________________
A. General
(1) This task gives the instructions to install the ground crew call horn to the left side of the nose gear wheel well.
B. Consumable Materials
(1) B00316 Solvent - Aliphatic Naphtha, TT-N-95 ú (2) Potting Compound - BMS 8-68, Type II (AMM 20-30-01)
C. References
(1)
23-42-02/401, Pilots' Call Panel
(2)
24-22-00/201, Electrical Power - Control
(3)
32-00-15/201, Landing Gear Door Lock
(4)
32-00-20/201, Landing Gear Downlocks
D. Access
(1) Location Zones
211/212 Flight Compartment
710 Nose Landing Gear and Doors
E. Install the Ground Crew Call Horn
S 114-011
(1)
Clean the horn terminals and the electrical leads with solvent.
(2)
Connect the electrical leads to the horn terminals.
S 394-014
(3)
Apply layers of potting compound to the electrical leads and the horn terminals.
S 434-012
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 COMMUNICATIONS 通訊(101)
