1) On the right miscellaneous electrical equipment panel, P37: a) 37D5, AFT EQPT COOLING FAN EXH NO. 1
(b)
Open this circuit breaker and attach a DO-NOT-CLOSE tag:
1) On the miscellaneous electrical equipment panel, P70: a) 70B2, AFT EQPT COOLING FAN EXH NO. 2
(c)
Make sure the No. 1 fan is on.
S 864-025
(3)
If the No. 2 fan was installed:
(a)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
1) On the miscellaneous electrical equipment panel, P70: a) 70B2, AFT EQPT COOLING FAN EXH NO. 2
(b)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
1) On the right miscellaneous electrical equipment panel, P37: a) 37D5, AFT EQPT COOLING FAN EXH NO. 1
(c)
Make sure the No. 2 fan is on.
S 214-026
(4)
Feel for airflow around the fan.
(a)
A small leak is permitted.
(b)
You must repair a large leak.
H.
Put the airplane back to its usual condition.
S 864-033
(1)
If the No. 1 fan was installed:
(a)
Remove the DO-NOT-CLOSE tag and close this circuit breaker:
1) On the miscellaneous electrical equipment panel, P70: a) 70B2, AFT EQPT COOLING FAN EXH NO. 2
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-26-01
ALL ú ú 04 Page 408 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(2) S 864-034If the No. 2 fan was installed: (a) Remove the DO-NOT-CLOSE tag and close this circuit breaker: 1) On the right miscellaneous electrical equipment panel, P37: a) 37D5, AFT EQPT COOLING FAN EXH NO. 1
(3) S 414-028Install the bulkhead lining in the aft end of the bulk cargo compartment (AMM 25-50-03/401).
(4) S 414-029Close the No. 2 cargo door, 822 (AMM 06-46-00/201).
(5) S 864-030Remove the electrical power, if it is not necessary (AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-26-01
ALL ú ú 07 Page 409 ú Dec 20/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
VENTILATION CHECK VALVE - REMOVAL/INSTALLATION
______________________________________________
1. General_______
A. One check valve is installed forward of each aft equipment ventilation fan, aft of the bulk cargo compartment. The check valves make sure that the air does not flow in the opposite direction in the ventilation system.
B. This procedure has instructions to remove and install the ventilation check valves.
TASK 21-26-02-004-001
2. Remove the Ventilation Check Valve (Fig. 401)__________________________________
A. References
(1)
AMM 06-46-00/201, Entry, Service and Cargo Doors Access Doors and Panels
B.
Access
(1)
Location Zones 165 Area aft of bulk cargo compartment (Left)
C.
Prepare for the Removal
S 864-002
(1)
To remove the No. 1 check valve:
(a)
Do the steps that follow:
1) Open this circuit breaker, on the right miscellaneous electrical equipment panel, P37, and attach a DO-NOT-CLOSE tag: a) 37D5, AFT EQPT COOLING FAN EXH NO. 1
S 864-003
(2)
To remove the No. 2 check valve:
(a)
Do the steps that follow:
1) Open this circuit breaker, on the miscellaneous electrical equipment panel, P70, and attach a DO-NOT-CLOSE tag: a) 70B2, AFT EQPT COOLING FAN EXH NO. 2
S 014-004
(3)
Open the No. 2 cargo door, 822 (AMM 06-46-00/201).
S 014-005
(4)
Remove the aft bulkhead in the bulk cargo compartment.
D.
Remove the check valve
(1)
Remove the clamp from the support bracket.
(2) 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：757 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(81)
