*
Alternate function parameters

*
Crew alertness monitor

*
Request uplink imbedded message identifier (IMI) table

*
Datalink option codes

*
Downlink trigger parameters.

You can modify any of the default values for these functions. In addition, you can create tables or values for these functions:
*
Downlink address table

*
Airline ground address table.

There are no default values for these tables.
Performance, Guidance and Takeoff Data Alternate Function Parameters
Parameter  Default Value  Valid Range 
All Eng Accel ht  1000 feet  400-9999 feet 
Eng out accel ht  1000 feet  400-9999 feet 
Speed restriction  none  100-400 kts 
Speed transition  250 kts/10000 ft  Spd 100-400 kts Alt 0-40000 ft 
Maneuver margin  1.2 FAA 1.3 CAA/JAR  1.2-1.3 FAA 1.3-CAA/JAR 
Rate of climb margin for climb  100 ft/min  0-500 ft/min 
Rate of climb margin for cruise  100 ft/min  0-500 ft/min 
Default thrust rating in cruise  Max cruise thrust  Max climb or max cruise thrust 
Minimum cruise time  1 minute  1-20 minutes 
Thrust reduction height/ flap setting  1000 feet  400-9999 feet 
Fuel freeze/min operating temp  -37C  -99C to -1C 
Takeoff Derate 1  10%  0-30% 
Takeoff Derate 2  20%  0-30% 
Company speed  Defined in NDB  1-400 kts CAS (.1 to .99 MACH) 
Company speed thrust rating  Max climb thrust  Max climb, Max cruise, Max con 

The table shows the default values and the valid range for the The table shows the default values and the valid range for the performance, guidance and takeoff data.
alternate function parameters.
EFFECTIVITY BEJ ALL  34-61-00 
Page 98.95 
D633W101-BEJ  May 05/2003 
BOEING PROPRIETARY -Copyright # -Unpublished Work -See title page for details. 

FMCS -AIRLINE MODIFIABLE INFORMATION

Parameter  Default Value  Valid Range 
Altitude  FMCF computed  1500-40000 ft 
Min runway length  0 feet  0-15000 ft 
Speed mode  ECON  ECON, CAS/MACH, LRC, EOLRC, COSPD 
Speed value  None  1-400 kts CAS .1 -.99 MACH 

Crew Alertness Monitor Parameters

The table shows the default values and the valid range for the crew alertness monitor parameters.
Parameter  Default Value  Valid Range 
Cruise advisory timer  15 min  15-60 min 
Cruise caution timer  20 min  15-75 min 
Cruise warning timer  25 min  15-75 min 
Descent advisory timer  5 min  5-60 min 
Descent caution timer  6 min  5-75 min 
Descent warning timer  7 min  5-75 min 

Also, the default settings for the crew caution, and advisory annunciations are enable any or all of these annunciations.  alertness warning, disabled. You can 
Request Uplink IMI Table 

The table shows the default IMI values and the associated imbedded element identifier (IEI) values for uplink requests.
IMI Description  IMI  Associated IEI 
Flight Plan  FPN  RP, FN 
Load information  LDI  RR 
Performance initialization  PER  PR 
Position  POS  POS 
Progress (ETA) report  PRG  DT 

Datalink Option Codes
You set a bit in a data word to a logic 1 or a logic 0 to control the datalink option codes. Bits 1-10 are for functions that show on a CDU display. The default value for these functions is set to a logic 0 which causes the function to show on the appropriate display. A logic 1 blanks the function. These are the functions:
*
Bit 1 -Flight plan data request inhibit

*
Bit 2 -Performance Initialize data request inhibit

*
Bit 3 -Takeoff data request inhibit

*
Bit 4 -Enroute wind data request inhibit

*
Bit 5 -Descent forecast data request inhibit

*
Bit 6 -Company preferred alternate request inhibit

*
Bit 7 -Alternate flight list data request inhibit

*
Bit 8 -Alternate weather data request inhibit

*
Bit 9 -Flight plan data report inhibit

*
Bit 10 -Position report inhibit.

Bits 11 through 23 control data that may be added to message content or functions that will be added. These items have a default value of logic 0 which excludes the functionality:
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 導航 Navigation 2(69)