曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SETUP INCORRECT Page
IF you go to this page, it means that you need to look at the instructions again before you can go out of BITE. Push the SETUP PAGE prompt, LSK 6l to go back to the END 0F DFCS BITE page. Push the EXIT prompt, LSK 6R to go to the MAINT BITE INDEX page.
January 2005
22-11

- 162 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

 

OR

A22-11-00-115.fm
DFCS BITE PAGES - BITE TEST EXIT
January 2005
22-11

- 163 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

DFCS BITE PAGES - IDENTIFICATION AND CONFIGURATION

DFCS BITE MAIN MENU Page You select the identification and configuration pages when you push LSK 5L. This shows the CONFIGURATION page.  Page 1 will provide information for FCC A and page 2 for FCC B. Page 3 is for software crossload between FCC’s on-aircraft. This page will only show if there is a software mismatch between FCC’s. 
CONFIGURATION Page 
From this page, you select the configuration for channel A (FCC A) or channel B (FCC B). Push LSK 2L to select Channel A. Push LSK 3L to select Channel B. 
FCC-X CONFIGURATION Page 
There are two configuration pages for each FCC. You use the NEXT PAGE and PREV PAGE function keys on the MCDU to go between the two pages. The first page shows this data: 
-Boeing part number for the FCC -Honeywell part number for the FCC. 
The second page shows CPU1 and CPU2 software part numbers. 
Rockwell Collins Enhanced Digital Flight Control System Differencesl 
The Identification and Configuration pages provide hardware and software part number information. 
Collins EDFCS screens will provide harware part number and the serial number of the installed FCC. Like the Honeywell DFCS, this screen will also indicate the FCC OPS software number. 
- 164 -

A22-11-00-116.fm
January 2005
22-11
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

A22-11-00-116.fm
DFCS BITE PAGES - IDENTIFICATION AND CONFIGURATION

January 2005
22-11
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

A22-11-00-117.fm
DFCS BITE PAGES - CURRENT STATUS 
DFCS BITE MAIN MENU Page To do a current status test, you select the FAULT REVIEW prompt on the DFCS BITE MAIN MENU page. When you push LSK 1L, you get the FAULT REVIEW page.  systems are in autotest. The page also shows the percentage of the tests that are completed. 
FAULT REVIEW Page 
To select CURRENT STATUS, push the LSK 1L. This gets the AUTOTEST INITIALIZATION page for the current status test. 
AUTOTEST INITIALIZATION Page 
This page gives instructions to setup the current status test. After you have setup the test correctly, push LSK 6L to continue the test. If the setup is not correct, you get the INITIALIZATION SETUP INCORRECT page. If the setup is correct, you get the page that tells you the autotest is in progress. 
INITIALIZATION SETUP INCORRECT Page 
This page tells you that the initialization setup is not correct. To return to the setup page, push LSK 6R. If you made the correct changes, push the LSK 6L to continue. 
Current Status Autotest 
If the setup is correct, the autotests for all systems in group 10 starts. As the tests continue, the name of the system in test and its library number shows on the MCDU page. For example, if the DME is now in autotest, you see *STATUS *10.05 on the second line and *DME *-A/B on the third line of the MCDU. These displays change as different 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-700 AVIONCS BITE HANDBOOK 航電自測設備手冊 1(43)