AUTOPILOT
1.
 ENGAGE A/P A IN CWS

2.
 ENGAGE A/P A IN CMD WITH NO ROLL OR PITCH MODES SELECTED.

3.
 ENGAGE A/P A IN CMD AND SELECT HDG SEL AND ALT HLD.

4.
TURN THE CONTROL WHEEL

A/P ENGAGE CMD A CMD B 
CWS A  CWS B 
DISENGAGE  CWS P CWS R 
A/P ENGAGE CMD A CMD B 
CWS A  CWS B 
DISENGAGE  CMD CWS P CWS R 
A/P ENGAGE CMD A CMD B  HEADING  ALTITUDE 
CWS B CWS A DISENGAGE  10 30 10 30 HDG SEL  SEL ALT HLD  ALT HOLD  HDG SEL  CMD 

AND MOVE THE CONTROL COLUMN.
CMD
CWS P
CWS R

A22-11-00-106.fm
DFCS - GROUND OPERATIONS - CONTROL WHEEL STEERING

January 2005
22-11

- 221 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

THIS PAGE INTENTIONALLY LEFT BLANK
Bite23-27TAB.fm
Jan uar y 2 005 
- 222 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved 

AIRCRAFT COMMUNICATIONS ADDRESSING
AND REPORTING SYSTEM
(ACARS)

23-27

January 2005

- 223 -
SOUTHWEST AIRLINES.

ACARS - BITE - MAINTENANCE MENU
General
You will need to open the MCDU menu in order to open ACARS BITE. To access the MCDU menu page press the MENU key on the MCDU key pad. The menu page may also come up automatically when the FMCS goes through its power up.
The MCDU menu shows these sub-systems:
- FMCS 
- ACARS 
- ACMS 

<ACT> (Active) will be displayed to the right of the sub-system that has current active control of the display on the MCDU.
Access to Maintenance Menu
On the MCDU menu page select <ACARS (LSK 2L). This will bring up the ACARS MAIN MENU. The ACARS menu gives you access to the operational functions and Diagnostics
If AMI software version -00027 is installed enter SWAMX into the MCDU scratch pad and select DIAGNOCSTIC > (LSK 6R), If not simply select DIAGNOCSTIC > (LSK 6R).
NOTE:  To return to the MCDU menu select the MENU function key on the MCDU.
From the DIAGNOSTICS menu, select SYSTEM MENU > (LSK 6R). This will bring up the CMU SYSTEMS MENU.
737-700 MAINTENANCE TRAINING MANUAL
From the CMU SYSTEM MENU select MAINTENANCE > (LSK 5R).
NOTE:  To return to the DIAGNOSTICS menu, you must first return to the MAIN MENU using LSK 6L.
Maintenance Menu
The Maintenance Menu will give you access to the following CMU pages:
-PART NUMBERS: Lists software and CMU hardware part
numbers.
-FAULT LOG: Provides current and previous flight leg fault

information. -APM DATA: Shows information currently contained in the APM. -CHIME TEST: Will test the hi-lo chime function of the CMU and
aural warning module. -COMM AUDIT: Provides a list of uplinks and downlinks. -PROGRAM APM: Provides the ability to program the APM using
the MCDU.
NOTE:  To return to the System Menu select <SYS MENU (LSK 6L).

A23-27-00-021.fm
January 2005
23-27

- 224 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

A23-27-00-021.fm
LSK 6L

LSK 6L

MAINTENANCE ACCESS CODE REQUIRED TO ENTER DIAGNOSTIC PAGES WITH AMI SOFTWARE VERSION -0027 ONLY.

ACARS - BITE - MAINTENANCE MENU

January 2005
23-27

- 225 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved

A23-27-00-023.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

ACARS - BITE - PART NUMBERS
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-700 AVIONCS BITE HANDBOOK 航電自測設備手冊 2(12)