曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

three minutes indicating the CMU is restarting.
To verfiy the correct ACARS CMU software load, use the MCDU and access the ACARS. From the ACARS Main Menu select DIAGNOSTICS. From the DIAGNOSTICS menu select PART NO. The part numbers page will display the CMU software. You can also access the Parts Number page from the Maintenance Menu.
NOTE:  If you access the Part Numbers page from the DIAGNOSTICS menu, you will see a RETURN selectable in Line 5L, and MAIN MENU selectable in Line 6L. Using LSK 5L will take you back to the DIAGNOSTIC page, and using LSK 6L will take you back to the MAIN MENU.
NOTE:  If you access the Part Numbers page from the MAINTENANCE menu, you will see MAINTENANCE selectable in Line 6L. Using LSK 6L will take you back to the MAINTENANCE MENU.
January 2005
23-27

- 240 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

 

A23-27-00-019.fm
ACARS - TRAINING INFORMATION POINT - SOFTWARE LOADING
January 2005
23-27

- 241 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

THIS PAGE INTENTIONALLY LEFT BLANK
34-51BGTAB.fm
January 2005
34-51

- 242 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved

VOR/MARKER BEACON SELF TEST
34-51 & 34-32

January 2005

A34-51-00-020.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

VOR SYSTEM - SELF TEST
Test
You can do a test of the VOR/MB receivers from the flight compartment with the NAV control panels. The captain's NAV control panel does a test of VOR/MB receiver 1 and the first officer's NAV control panel does a test of VOR/MB receiver 2.
You need to set these controls to do a test of the VOR/MB receivers:
-Enter a valid VOR frequency into the active frequency display
window on the NAV control panel -Set a selected course of 000 on the DFCS mode control panel -Set the display mode selector on the EFIS control panel to the
VOR position
-Select VOR for the associated VOR/ADF switch on the EFIS
control panels.
-Push the test switch on the NAV control panel.

This is the ND display sequence that shows during the VOR test:
-Invalid display (VOR flag)
-NCD display (deviation bar out of view)
-Test display (deviation bar centered).

The test sequence will also show on the HSI, RDMI, and Standby RMI.
January 2005
34-51

- 244 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

A34-51-00-020.fm
VOR/ADF SWITCHES
COURSE
COURSE

ACTIVE STANDBY
SELECT
TFR
MAP
CONTROL
VOR PLN
APP
N
VOR 1 VOR 2
A CTR
OFF OFF
TEST

TEST
V
INOP INOP

SWITCH
NAV CONTROL PANEL EFIS CONTROL PANEL DFCS MODE CONTROL PANEL MODE SELECTOR
DME ---DME ---

DME ---GS 0
GS0

GS0 HDG
HDG
HDG
M M M
328

328
328
20

20
20
FROM
O O O
--- /------ /---

--- /---VOR 1

VOR
108.00

VOR 1 108.00
VOR 1 108.00

INVALID DISPLAY NCD DISPLAY TEST DISPLAY
VOR SYSTEM - SELF TEST

January 2005
34-51

- 245 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved

A34-51-00-022.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

VOR SYSTEM - SELF TEST
Test
The HSI and RDMI VOR pointers show the VOR test sequence:
-Invalid display (VOR flag)
-NCD display (deviation and VOR pointers out of view)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-700 AVIONCS BITE HANDBOOK 航電自測設備手冊 2(17)