曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

The cable is protected by the installation of shock absorbers which damp out any parasite vibration.
The #1 bearing vibration sensor permanently monitors the engine vibration and due to its position, is more sensitive to fan and booster vibration. However, this sensor also reads N2 and LPT vibrations.
The data is used to perform fan trim balance. This sensor is not a Line Replaceable Unit (LRU). In case of failure, the TRF sensor must be selected, through the CFDS in maintenance mode, in order to continue engine vibration monitoring.

EFG

.

.
CTC-201-253-01
EFFECTIVITY
SENSORS Page 39
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG
ENGINE SENSORS
TRF vibration sensor.
The TRF vibration sensor is secured at the 12 o’clock position on the turbine rear frame.
It is a 50 pC/g piezo-electric sensor.
A semi-rigid cable is routed from the vibration sensor to an electrical connector, which is secured on a bracket on the core engine at the 10 o’clock position.
The TRF vibration sensor monitors the vertical acceleration of the rotors and sends the analogue signals to the EVMU for vibration analysis processing.

EFG

.
CTC-201-252-01
EFFECTIVITY
SENSORS Page 41
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG
THIS PAGE INTENTIONALLY LEFT BLANK

EFG
ENGINE WIRING HARNESSES

EFFECTIVITY
73-21-50 Page 1
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG
ENGINE WIRING HARNESSES
Two types of harnesses are used, depending on where they are installed on the engine.
Fan section.
Harnesses that run on the fan inlet case and the fan frame, have a conventional design.
Cold section harnesses are designated :
-HJ7, HJ8, HJ9, HJ10, HJ11, HJ12, HJ13, DPM.
DPM is the harness routed from the Master Chip Detector (MCD) to the visual contamination indicator.
Core engine section.
Harnesses routed along the core engine section have a special design that can withstand high temperatures.
Hot section harnesses are designated :
-HCJ11L, HCJ11R, HCJ12L, HCJ12R, HCJ13.

EFG

 

CTC-201-062-01
EFFECTIVITY
73-21-50 Page 3
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG
ENGINE WIRING HARNESSES
The electrical harnesses ensure the connections between the various electrical, electronic and electro-mechanical components, mounted on the engine.
All the harnesses converge to the 6 o’clock junction box, which provides an interface between the two types.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TRAINING MANUAL CFM56-5B ENGINE SYSTEMS 培訓手冊 CFM56-5B 發動機系統(22)