-Oil temperature.
-Main filter clogging.

EFG

.
CTC-201-181-02
EFFECTIVITY
79-00-00 Page 9
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG
OIL GENERAL
Oil scavenge circuit.
The oil is drawn from the forward and aft sumps, the AGB and the TGB, by individual scavenge pumps, installed within the lube unit.
The oil passes through scavenge screens and then crosses a Master Chip Detector (MCD). This unit provides the first visual indication of contamination in the oil.
Finally, the oil goes through a scavenge filter to the servo fuel heater and passes into the main oil/fuel heat exchanger, before returning to the oil tank.

EFG

.
CTC-201-182-02
EFFECTIVITY
79-00-00 Page 11
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG
OIL GENERAL
Oil circuit venting.
A venting system links the oil tank, the engine sumps and gearboxes, in order to vent the air from the scavenge pumps and balance pressures between the different areas.
A dedicated pipe connects the forward and aft sumps for oil vapor collection and sumps pressure balancing.

EFG

.
CTC-201-183-02
EFFECTIVITY
79-00-00 Page 13
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL
EFG

THIS PAGE INTENTIONALLY LEFT BLANK

EFG

OIL TANK

EFFECTIVITY
79-11-00 Page 1
ALL CFM56-5B ENGINES FOR A319-A320-A321
ENGINE SYSTEMS Jan 03

CFMI PROPRIETARY INFORMATION
CFM56-5B TRAINING MANUAL

EFG
OIL TANK

The oil tank stores the engine oil and is installed on the fan case, at the 8 o’clock position, on one upper and two lower mounts with shock absorbers.
The tank body is made of light alloy covered with a flame resistant coating to meet fireproof requirements. Five inner bulkheads add strength and reduce oil sloshing.
The cover is a light alloy casting, bolted on the oil tank body.
The tank has an oil inlet tube from the exchanger, an oil outlet to the lubrication unit and a vent tube.

To replenish the oil tank, there are a gravity filling port, a remote filling port and an overflow port.
A scupper drain ducts any oil spillage to the drain mast and a plug is provided for draining purposes.
The tank has a pressure tapping connected to a low oil pressure switch and oil pressure transmitter, that are used in cockpit indicating. Next to this tapping, there is another which is similar and only used for test cells.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TRAINING MANUAL CFM56-5B ENGINE SYSTEMS 培訓手冊 CFM56-5B 發動機系統(74)