General
There is one TLA resolver for each engine. The resolver supplies the EEC with an electrical signal in proportion to the thrust lever angular position.
Functional Description
The TLA resolver has two elements. Each channel of the EEC supplies a low-voltage, ac excitation signal to one element of the resolver. The feedback signal from the resolver to the EEC is in proportion to the thrust lever angular position.
The ASM brake turns the resolver with the resolver drive pin. The mechanical stop pin prevents too much ASM brake movement that can damage the resolver.
EFFECTIVITY BEJ ALL  76-00-00 
Page 14 
D633W101-BEJ  Sep 05/2002 

PW4000 SERIES ENGINES

777 AIRCRAFT MAINTENANCE MANUAL

ENGINE CONTROLS -TLA RESOLVER

EFFECTIVITY BEJ ALL  76-00-00 
Page 15 
D633W101-BEJ  Sep 05/2002 

ENGINE CONTROLS -FUEL CONTROL SWITCHES -FUNCTIONAL DESCRIPTION

General
Each fuel control switch controls a set of four relays in the ELMS. The relays control many functions. These are the relays:
*
A: reset/fuel spar

*
B: ignition/fire detection

*
C: generator control/ignition

*
D: EEC reset/IDG disconnect.

One electrical source supplies power to both coils of each relay. Each position of the fuel control switch supplies a ground for one coil of each relay.
A: Reset/Fuel Spar Relay
The reset/fuel spar relay controls these functions:
*
Fuel control switch position signal to the AIMS

*
EEC channel A reset signal

*
Fuel control switch position signal to the ELMS

*
Fuel spar valve control.

B: Ignition/Fire Detection Relay
The ignition/fire detection relay controls these functions:
*
EEC power control

*
Fuel control switch position signal to the engine data interface unit (EDIU)

*
Ignition 1 power

*
Fire switch lockout control.

C: Generator Control/Ignition Relay
The generator control/ignition relay controls these functions:
*
Engine relay unit (ERU) fuel control power

*
Fuel metering unit (FMU) cutoff solenoid power

*
Fuel control switch position signal to the generator control unit (GCU)

*
Ignition 2 power.

D: EEC Reset/IDG Disconnect Relay
The EEC reset/IDG disconnect relay controls these functions:
*
EEC channel B reset signal

*
IDG disconnect switch power.

EFFECTIVITY BEJ ALL  76-00-00 
Page 16 
D633W101-BEJ  Sep 05/2002 

ENGINE CONTROLS -FUEL CONTROL SWITCHES -FUNCTIONAL DESCRIPTION

EFFECTIVITY BEJ ALL  76-00-00 
Page 17 
D633W101-BEJ  Sep 05/2002 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 發動機控制 Engine Control PW 777 AIRCRAFT MAINTENANCE MANUAL(5)