曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

General
SHZ 009-999
You use the airborne data loader (ADL) to load data into the
FMCS and other airplane systems. The steps to load data into
the FMCS and the other systems are similar.
SHZ 001-003
You use the portable data loader (PDL) to load data into the
FMCS and other airplane systems. The steps to load data into
the FMCS and the other systems are similar.
NOTE: The portable data loader is not a Boeing supplied item.
This coverage is included for information only. See the
data loader instructions, which are supplied by the
vendor.
SHZ ALL
To load data into the FMC, set the data load selector to the FMC
position. This connects the data loader to FMC 1.
You can load these databases into the FMCS:
* Operational flight program (OFP)
* Navigation data base
* Performance default data base
* Airplane model/engine performance data base
* ACARS data link data base
* Software options data base.
Preparation
The information below shows the steps to load a navigation
data base. The procedure to load the other systems data or the
other FMCS data is similar.
SHZ 009-999
This is a summary of the steps to load data with an ADL:
* Airplane must be on the ground
* Apply electrical power to the airplane
* Set the data loader 3-position switch to the L position to load
the FMC
* Set the data load selector to the FMC position
* Open the data loader access door
* Put the necessary diskette into the ADL.
SHZ 001-003
This is a summary of the steps to load data with a PDL:
* Airplane must be on the ground
* Apply electrical power to the airplane
* Open the DATA LOADER circuit breaker
* Connect the PDL to the data transfer receptacle
* Close the DATA LOADER circuit breaker
* Set the data loader 3-position switch to the L position to load
the FMC
* Set the data load selector to the FMC position
* Open the data loader access door
* Put the necessary diskette into the PDL.
SHZ ALL
FMCS - TRAINING INFORMATION POINT - FMC DATA LOADING
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.109
D633A101-SHZ1 Oct 10/2005
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-049
The CDUs automatically go to the FMCS DATALOAD page when
the CDU receives valid data from the loader.
The data load process is automatic. Except to change diskettes,
no further operation is necessary after you do the above steps.
Return the data loader control panel to the NORM position after
the transfer is complete.
NOTE: Do not interrupt electrical power to the system during
software loading. If power is interrupted, you will need
to do the software load procedure again.
FMCS - TRAINING INFORMATION POINT - FMC DATA LOADING
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.110
D633A101-SHZ1 Oct 10/2005
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-049
FMCS - TRAINING INFORMATION POINT - FMC DATA LOADING
FMCS - TRAINING INFORMATION POINT - FMC DATA LOADING
EFFECTIVITY
SHZ 009-999 34-61-00
Page 98.111
D633A101-SHZ1 Oct 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-049
FMCS - TRAINING INFORMATION POINT - FMC DATA LOADING
FMCS - TRAINING INFORMATION POINT - FMC DATA LOADING
EFFECTIVITY
SHZ 001-003 34-61-00
Page 98.112
D633A101-SHZ1 Oct 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-049
General
SHZ 009-999
You use the airborne data loader (ADL) to load the operational
program software (OPS) into the CDUs.
SHZ 001-003
You use the portable data loader (PDL) to load the operational
program software (OPS) into the CDUs.
NOTE: The portable data loader is not a Boeing supplied item.
This coverage is included for information only. See the
data loader instructions, which are supplied by the
vendor.
SHZ ALL
To load the OPS into the CDUs, set the data loader selector to
the CDU position and the data loader 3-position switch to the L
or R position depending on which CDU is to be loaded. This
connects the loader to the CDU being loaded.
Preparation
SHZ 009-999
This is a summary of the steps to load the OPS with an ADL:
* Airplane must be on the ground
* Apply electrical power to the airplane
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NGAMM4(18)