曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

┗━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━┛
CCM ALL
┏━━━━━━━━━━━━━━━━┳━━━━━━┳━━━━━━━━━┓
┃I  -~ A318                      ┃AUTO FLIGHT ┃1.22.10     P 15  ┃
┃  .-,,.8, ,, ~% A319            ┃            ┃                  ┃
┃ Lli,~ A320                     ┃            ┃                  ┃
┃                                ┃            ┣━━━━┳━━━━┫
┃      A~7-~'M" A321             ┃  GENERAL   ┃SEQ 001 ┃REV 25  ┃
┃   FLIGHT CREW OPERATING MANUAL ┃            ┃        ┃        ┃
┗━━━━━━━━━━━━━━━━┻━━━━━━┻━━━━┻━━━━┛
MCDU FUNCTION KEYS
The function keys on the Multipurpose Control and Display Units allow the pilot to call up
MCDU pages quickly.
The following is a summary of the purpose of each key. (Volume 4, FMGS Pilot's Guide
provides a full description of the pages.
DIR       Calls up the DIR TO page, and allows the pilot to proceed directly from
             present position to any waypoint entered manually or selected in the active
             flight plan.
PROG     Calls up the progress page corresponding to the phase of the active flight
             plan that is in progress.
             This page displays navigation information and active data such as the
             optimum and maximum recommended cruise flight levels. It allows the
             pilot to update the FMGS position and to get a bearing and distance to any
             location.
PERF
INIT
Calls up the performance pages, which display the optimum speed or Mach
number for each phase. The pilot can amend these pages. The first page to
be displayed is the one corresponding to the current flight phase (except
for preflight and done phases).
The pilot can then use the appropriate 6L or 6R LSK to call up pages
corresponding to future flight phases.
Calls up the flight plan initialization A page, which also gives the pilot
access to the B page. The pilot uses the INIT pages to initialize Flight
Management for the flight.
The pilot uses the INIT A page primarily to insert his flight plan and to align
the inertial reference system.
The pilot uses the INIT B page to insert aircraft weight, fuel on board, CG
and various fuel requirements. The FMGS uses this data to compute
predictions and fuel planning parameters.
The pilot has access to the INIT A page only in the preflight phase.
INIT B page (not accessible after engine start) is called up by pressing the
"NEXT PAGE" key.
CCM ALL
┏━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━┓
┃                                ┃                          ┃1.22.10     P 16      ┃
┃                                ┃                          ┣━━━━━┳━━━━━┫
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AIRBUS A320 Flight Crew Operating Manual1(150)