曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

sirnilnr urgent signals. for example LSY, PAS and T13. marks shall be located equidistant from the leading and trailing
edge,s of tllc wings. The tops of the letters attd numbers shall
. V o t e . For referenct? to llzes~ codrs, .see the current!\. he toward the leading edge of file wing.
cflecti~qeb lterrzntional T(!leco~i~rnunicatioRnesg lilntions.
3.3.3 Friselage (or equivalent stmcturp) rind vel-tical tail
surfaces. On heavier-than-air aircralt, the rnarks shall appear
3. LOCATION OF NATIONALITY,
COMMON AND REGISTRATION MAWS
3.1 General
either on eacb side of the fuselage (or equjvalent smctute)
between the wings and the tail surfacc or on the uppcr halves
of the vcrtical tail surfaces. Whcn located on a sing-l e vertical
tail surfacc, tliey shall appear on both sides. Wheu located on
mulcivertical tail surfaces, ttiey shall appear on the outboard
sides of the outer surfaces.
The nationality or common mark and rcgisrration mark shall 3.3.3 Special cases. If a heavier-than-air aircraft does not
be painted on the aircraft or shall bc affixed by any other possess parts corresponding to those mentioned in 3.3.1 and
means ensuring a similar d e P e of Permanence. The marks 3.3 .I, the marks shall appear in a manner such that the aircraft
shall be kept clean and visible at all times. can be identified readily.
3.2 Lighter-than-air aircraft
3.2.1 Airships. The marks on an airship shall appear either 4. MIEASUREMENTS OF NATIONALITY,
on the hull or on the stabilizer surfaces. Where the marks COMMON AND REGISTRATION MARKS
appear on the hull. tliey shall be located lengthwise on each
side of the hull and also on its upper sl~faceo n the line of The lettcrj and numbers in each separate groop of marks shall
synunetry. Where the marks appear on thc stabilizer surfaces, of equal height,
they shall appear on tlie horizontal and on the vertical
stabilizers; the marks on the horizontal stabilizer shall he
located on the right half of the upper surface and on the left
half of the lower surface, with the tops of the letters and 4.1 Lighter-than-air aircraft
numbers toward the leading edge; the illarks on the vertical
stabilizer shall be located on each side of the bottom half 4.1.1 The height of the marks on lighter-than-air aircraft
stabilizer, with the lettcrs and numbers placed horizontally. other than unmanncd free balloons shall be at least
50 centimetres.
3.2.2 Spherical bal1oon.s (other than unmanned free
balloons). The marks shall appear in two places diarnet*jcally 4.1.2 The measurements of the marks related to
opposite. They shall be located near the maximum horizontal unmanned free shall be by the State of
circumference of the balloon. Regismy, taking into account the size of the payload to which
3.2.3 Nan-spherical balloons (other than unrmnned free die identification plate is affixed.
balloons). The marks sliall appear on each side. They shall be
located near the maximum cross-section of the balloon
immediately above cither rhe rigging band or tl~e points of
attachment of the basket suspension cables. 4.2 Ileavier-than-air aircraft
3.2.4 Lighter-llzan-air aircr~zft( other than ~cr~rnannefrde e 4.2.1 Wings. The height of the marks on the wings of
ho[[oons). rile side nlarks be visible both from the sides heavier-than-alr aircraft shall be a1 lMst 50 Centimetres.
and from the g-ound.
4 - 2 2 F~rselnge( or eqrti1:nlent .TI/-lictrireu)r zd vertical tail
3.2.5 IIrzrnarir~erl.fireb ol!oo!zs. The marks sl~alal ppear on srrrfiices. The height of the marks on he fuselage !or
l.he idcntiLicaiion platc (see Section 3:). equivalent ~Euciure) and on tbe vertical !.ail surfaces of
heavier-than-air aircraft shall be at least ?O cenljmetres.
3.3 Hca~ier-than-air aircraft 4.2.3 Specini casc.s. Yf a heavier-than-air aircrafi does not
possess parts corresponding Lo those mentioned in 4.2.1 3rd
3.3.1 iVi?l,ps. On Ileavier-tbarr-air aircrafl, tli- marks shall -1.3.2. ihc measurements of the marks shall. be such that file
ap?c;lr oncs on :he lirmer surface of the wing qtrscture. ?They ajrfrafl cat! Rc ideil~ii'icdi 'eadi!?.
5. TYPE 8 F CHARtPCTERS FOR NATXOSALITI;,
COX1Mt)N AXD KEGISTR.4TJOS MARKS
5.1 The letters shall bc capital letters in Ro~nati characters
without omamentation. Numbers shall be hahic numbers
with out ornamentation.
5.2 The width of each character (except h e letter I and
the number 1) and the length of hyphens shall be two-thirds of
the height of a character.
5.3 The charactcrs and hyphens shall be formed by solid
lines and shall be of a colou* contrasting clearly with the background.
The thickness of the lines shall he one-sixth of the
height of a character.
5.4 Each charactcr shall br separ;lted from tha! \\;hich i:
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：附件7--航空器國籍和登記標(biāo)志(5)