曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

which is itself a division of Cobham, a group
quoted on the London Stock Exchange.
Air Precision is located at Le Plessis-
Robinson, a few miles South-West of Paris,
where the technology and material and the
human resources necessary to its businesses
are housed in premises covering 50,000
sq. feet.
Its logistic and human skills are part of Air
Precision's major strengths.
Its ability to develop and to innovate and the diversity of its skills enable Air Precision to maintain its leadership in areas
as diverse as aircraft equipment maintenance, avionic manufacture and sliprings.
Quality
Equipment Division
As part of its military programs, Air Précision received from the French MoD RAQ 2 certification in 1982 and more recently
the AQAP 120 certification.
As a manufacturer of civil aerospace equipment, Air Précision received from the EASA (European Aviation Safety Agency)
the Part 21 G approval and is recognized as an approved supplier by the major aircraft manufacturers (Airbus,
Bombardier, Embraer, Eurocopter ).
The Quality Assurance Department is totally involved in all stages of the design, development and manufacture and
constantly seeks to maintain and improve quality by the application of an organisation based on the ISO 9001 standard.
Maintenance Division
Since its establishment in 1946, Air Precision has worked in aircraft equipment maintenance. Air Precision received the
JAR 145 approval in 1993 from the French DGAC and the FAR 145 approval in 1995 from the F.A.A. (Federal Aviation
Administration) and the Part 145 approval in 2004 from the EASA (European Aviation Safety Agency).
Having as its priority the optimization of the Turn Around Time (TAT) and the service provided to customers, Air Precision
acquired top-of-the-range technical installations to enhance the quality of its service with for instance a 10 000
class Clean Room of 200 m² (less than 10 000 particles of 0.5 μm per cubic foot).
AIR PRECISION - 5 avenue Denis Papin, BP36 - 92353 LE PLESSIS ROBINSON - France
Phone : +33 146 012 124
www.airprecision.com
The Company
Quality Assurance Department Organisation
In order to comply with technical, organisational requirements and international regulations, the Quality Assurance Department
includes inspection, calibration and quality assurance functions as shown in the following organisation chart :
Under the direct authority of the President, the Quality Assurance Manager has functional links with all departments of
the company. This organisation allows him to have an objective view on the company’s performances and to take any
appropriate corrective actions.
Quality Policy
Management is committed to a policy of constant progress and to this end has implemented a quality management system
designed for continuous improvement while fulfilling the needs of all parties concerned, and whose effectiveness is
revealed by :
Overall objective : the operational result
The ultimate aim of the action tending to this objective are:
• customer satisfaction,
• shareholder satisfaction.
All the resources of Air Précision S.A.S. are implicated in this policy with Management leadership based on communication
and the active participation of suppliers and partners.
The criteria for measuring the effectiveness of the process using indicators are documented in the Quality Manual. The
objectives are consistent with the overall objective and with the expected level of satisfaction of all parties involved.
1
BUTTING
AIRCRAFT & AEROSPACE INDUSTRY
P R O D U C T S F O R T H E A I R C R A F T A N D
A E R O S P A C E I N D U S T R Y
2
BUTTING
AIRCRAFT & AEROSPACE INDUSTRY
Layout: HenryN. Braunschweig
P R O D U C T I O N & S E R V I C E P R O F I L E
Photographs
• Cover: Ariane 5
(Photograph by courtesy
of CNES)
• EPS Upper Stage
(Photograph by courtesy
of Astrium)
• inside:
Rutzen & Scherer,
H. Butting, S. Schneider,
S. Wilke, Firmenarchiv
• Aerial photograph:
Stuttgarter Luftbild
Elsäßer GmbH
Special thanks to the following
companies for kindly
providing us with photographs:
CNES, Astrium
Edition 2005
Further processing
of pipes using forming,
grinding,
Laser cutting, e. g.
jackets for pumps,
valves and lamps
Piping
technology
Assemblies
Surface
treatment
Services
Fittings Tees, reducers,
special fi ttings
Pipe bends acc.
to DIN 2605
Collars acc.
to DIN 2642
Elbows with
long radii
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料24(91)