曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

AUTO : On ground : The selected ATC Transponder only operates in the selective
aircraft interrogation mode of Mode S.
In flight : The selected ATC Transponder operates.
(3) ALT RPTG switch
ON : The transponder sends barometric standard altitude data.
OFF : No altitude data transmission. If the TCAS is installed, the upper ECAM displays
"TCAS STBY" in green.
(4) IDENT switch
The flight crew presses this button to send the aircraft identification signal.
(5) Code display
The window displays the selected code.
(6) Pushbuttons
The flight crew uses these pushbuttons to set the code assigned by ATC.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
NAVIGATION
ATC - CONTROLS AND INDICATORS
A330/A340 FLEET DSC-34-50-20 P 2/4
FCOM 19 AUG 10
(7) CLR pb
The flight crew uses this pushbutton to clear the code display.
Note: As long as the four figures of the new code are not entirely written, the previous code
remains.
(8) ATC FAIL light
This light comes on if the selected transponder fails.
CONTROL PANEL
Applicable to: ,
(1) SYS selector
Selects Transponder 1 or 2.
(2) IDENT switch
The flight crew presses this button to send the aircraft identification signal.
(3) Pushbuttons
The flight crew uses these pushbuttons to set the code assigned by ATC.
(4) Code display
The window displays the selected code.
(5) ATC FAIL light
This light comes on if the selected transponder fails.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
NAVIGATION
ATC - CONTROLS AND INDICATORS
A330/A340 FLEET DSC-34-50-20 P 3/4
FCOM 19 AUG 10
(6) Mode selector
STBY : The two ATC Transponders and the TCAS are electrically-supplied, but are not
operating.
ALT
RPTG
OFF
: No altitude data is transmitted.
XPNDR: On ground : The selected ATC Transponder only operates in the selective
aircraft interrogation mode of Mode S.
In flight : The selected ATC Transponder operates.
Baro altitude data is transmitted.
ATC 1 uses ADR 1 or ADR 3. ATC 2 uses ADR 2 or ADR 3.
TCAS is on standby.
(7) CLR pb
The flight crew uses this pushbutton to clear the code display.
Note: As long as the four figures of the new code are not entirely written, the previous code
remains.
CONTROL PANEL
Applicable to:
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
NAVIGATION
ATC - CONTROLS AND INDICATORS
A330/A340 FLEET DSC-34-50-20 P 4/4
FCOM 19 AUG 10
(1) ATC selector
Selects Transponder 1 or 2.
(2) Mode selector
STBY : Both ATC transponders are electrically supplied but not operating.
ON : Selected ATC operates.
AUTO : On ground : The selected ATC Transponder only operates in the selective
aircraft interrogation mode of Mode S.
In flight : The selected ATC Transponder operates.
(3) ALT RPTG switch
ON : The transponder sends barometric standard altitude data.
OFF : No altitude data transmission. If the TCAS is installed, the upper ECAM displays
"TCAS STBY" in green.
(4) IDENT switch
The flight crew presses this button to send the aircraft identification signal.
(5) Code display
The window displays the selected code.
(6) Rotating Knobs
Flight crew uses these knobs to select the assigned code. Each knob has outer and inner ring.
Each ring drives one digit.
(7) ATC FAIL light
This light comes on if the selected transponder fails.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
NAVIGATION
ATC - ELECTRICAL SUPPLY
A330/A340 FLEET DSC-34-50-40 P 1/2
FCOM 19 AUG 10
BUS EQUIPMENT LIST
Applicable to:
L3
NORM EMER ELEC
AC DC DC
BAT
AC
ESS
DC
ESS HOT
ATC AATTCC 12 AC2-3 X
BUS EQUIPMENT LIST
Applicable to: ,
L3
NORM EMER ELEC
AC DC DC
BAT
AC
ESS
DC
ESS HOT
ATC AATTCC 12 AC2 SHED
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
NAVIGATION
ATC - ELECTRICAL SUPPLY
Intentionally left blank
A330/A340 FLEET DSC-34-50-40 P 2/2
FCOM 19 AUG 10
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
NAVIGATION
WEATHER RADAR - DESCRIPTION
A330/A340 FLEET DSC-34-60-10 P 1/2
FCOM 19 AUG 10
DESCRIPTION
Applicable to: ALL
The aircraft has two weather radar systems. Only one transceiver works at a time.
It can display the weather image on the ND, in any ND mode except PLAN.
Each pilot may remove the weather image from their ND, by setting the associated brightness control
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 3(128)