(b)
Open the access doors 812, 822 and 824.
(Ref. Fig. 601/TASK 05-21-20-991-002)
1EFF : ALL 1 05-21-20 Page 614 1 1 Aug 01/05 R 1 1 1CES 1
4. Procedure Subtask 05-21-20-210-057
A. Inspection
(1)
Do a general visual inspection of the lateral avionic compartment.
(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations (wiring, ducting, piping) are attached correctly.
NOTE : Lift the insulation blankets sufficiently to complete a correct general visual inspection as necessary.
5. Close-up Subtask 05-21-20-410-057
A. Close Access
(1) For zones 125 and 126
(a) Close the access doors 812, 822 and 824.
1EFF : ALL 1 05-21-20 Page 615 1 1 Aug 01/05 R 1 1 1CES 1
TASK 05-21-20-200-010
Zonal Inspection of the Rear Avionic Compartment
1.
Reason for the Job
Refer to the MPD TASK: ZL-127-02
2.
Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2.5 m (8 ft. 2 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-41-00-010-002 Open the Avionics Compartment Doors for Access 52-41-00-410-002 Close the Avionics Compartment Doors after Access 53-12-13-000-001 Removal of the avionics compartment floor panels 53-12-13-400-001 Installation of the avionics compartment floor panels 05-21-20-991-007 Fig. 602 05-21-20-991-006 Fig. 603
1EFF : ALL 1 05-21-20 Page 616 1 1 Aug 01/05 R 1 1 1CES 1
3. Job Set-up
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 05-21-20-010-059
A. Get Access
(1)
Put an access platform in position at zones 127 and 128. (Ref. Fig. 602/TASK 05-21-20-991-007)
(2)
Open the access door 824 (Ref. TASK 52-41-00-010-002).
(3)
Open the FWD cargo compartment door 825 (Ref. TASK 52-30-00-860-001).
(4)
Remove the sidewall panels 131AW, 131BW, 131CW, 131DW, 132BW, 132EW. (Ref. Fig. 603/TASK 05-21-20-991-006)
(5)
Remove the floor panels 127BF, 127CF, 127DF, 128CF, 128EF. (Ref. TASK 53-12-13-000-001)
R **ON A/C 151-199, 401-499,
Subtask 05-21-20-010-059-B
A. Get Access
(1)
Put an access platform in position at zones 127 and 128. (Ref. Fig. 602/TASK 05-21-20-991-007)
(2)
Open the access door 824 (Ref. TASK 52-41-00-010-002).
(3)
Open the FWD cargo compartment door 825 (Ref. TASK 52-30-00-860-001).
(4)
Remove the sidewall panels 131AW, 131BW, 131CW, 131DW, 132BW, 132EW. (Ref. Fig. 603/TASK 05-21-20-991-006)
(5)
Remove the floor panels 127BF, 127BG, 127CF, 127DF, 128CF, 128EG, 128GF. (Ref. TASK 53-12-13-000-001)
Sidewall Panels of the Forward Cargo Compartment Figure 603/TASK 05-21-20-991-006
1EFF : 1 R 1 1CES ALL 1 11 1 05-21-20 Page 618 Aug 01/05
**ON A/C ALL
4. Procedure Subtask 05-21-20-210-059
A. Inspection
(1)
Do a general visual inspection of the rear avionic compartment (Zones 127 and 128).
(2)
Make sure that there are no signs of corrosion, leaks, cracks or damage.
(3)
Make sure that all the installations (wiring) are attached correctly.
NOTE : Lift the insulation blankets sufficiently to complete a correct general visual inspection as necessary.
5. Close-up
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 05-21-20-410-059
A. Close Access
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 1(20)
