8.
 On the Data Loading Selector:

-
push the PREV or NEXT key until you get the indication of the FMGC2 that you can download,

-
push the SEL CTL key.

9.
 Close the circuit breaker 10CA2.

10.
 On the multipurpose disk drive unit:

-put the FM BITE DOWNLOAD TOOL (PS4084544-103) into the disk drive.
 11. On the multipurpose disk drive unit:
-FMGC1 SELECTED indication is shown.
-the power-up test of the FMGC1 starts.
 -at the end of this test, the triple click aural warning sounds.
On the multipurpose disk drive unit:
-the TRANS IN PROG indication is shown
-then, the WAIT RESPONSE indication isshown when the transfer is completed.
On the display of the Data LoadingSelector:
-FMGC2NOT SELECTED indication is shown,
-FMGC2 SELECTED indication is shown.
-the power-up test of the FMGC2 starts.
 -at the end of this test, the triple click aural warning sounds.
-On the multipurpose disk drive unit:
-the TRANS IN PROG indication is shown
-then, the WAIT RESPONSE indication isshown when the transfer is completed.

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-eject the floppy disk.
 12. On the Data Loading Selector:
 -set the ON/OFF switch to OFF.
 13. Open the circuit breaker 10CA2
 (wait for more than 5 seconds).

 14. Close the circuit breakers 10CA1 and 10CA2. R **ON A/C 106-149, 151-199, 211-299, 301-399, 401-499,
 Post SB 22-1089 For A/C 151-199,211-212,
 Subtask 22-70-00-610-062-B

 A. Downloading of the FM BITE Data NOTE : Do not use the same floppy disk for the two FMGC downloading.
____
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
 Open the circuit breakers 10CA1 and 10CA2.

 2.
 On the overhead panel, on the Data Loading Selector:

-Set the ON/OFF switch to ON.
3. On the overhead panel, on the Data Loading Selector:
-Push the PREV or NEXT key until you get the indication of the FMGC1 that you can download,
On the display of the Data LoadingSelector:
-DB/N: PUSH NEXT/PREV indication is shown.
 On the multipurpose disk drive unit:
 -The < < MDDU READY > > indication is shown.
On the display of the Data LoadingSelector:
-FMGC1NOT SELECTEDindication is shown,

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- Push the SEL CTL key.  - FMGC1 SELECTED
 indication is shown.
 On the MCDU, the DATA LOAD page is displayed.
 4. On the multipurpose disk drive unit: On the multipurpose disk drive unit:
 - Put the FM BITE DOWNLOAD TOOL  - The WAIT RESPONSE indication is shown
 (PS4087689-102) into the disk drive.
 5. Close the circuit breaker 10CA1.  - The power-up test of the FMGC1 starts.
 - At the end of this test, the triple click aural warning sounds.
 On the multipurpose disk drive unit: - The TRANSF IN PROG indication is
 shown
 - The BUS n :xxxxxxx indication is
 shown.
 NOTE : "n" is the number of the bus (1____ to 8) in transfer. "xxxxxxx" is the number of bytes (0 to xxxxxxx).
 - Then, the WAIT RESPONSE indication is shown when the transfer is completed. On the MCDU, - The DATA LOAD page is shown with loading files indication - When the download is completed, the DOWNLOAD COMPLETE message is shown.
 6. On the multipurpose disk drive unit:
 - Eject the floppy disk.
 7. Open the circuit breaker 10CA1. 

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
8. On the Data Loading Selector: - Push the PREV or NEXT key until you get the indication of the FMGC2 that you can download,  On the display of the Data LoadingSelector:- FMGC2NOT SELECTED indication is shown,
 - Push the SEL CTL key.  - FMGC2 SELECTED
 indication is shown.
 9. On the multipurpose disk drive unit: On the multipurpose disk drive unit:
 - Put the FM BITE DOWNLOAD TOOL  - The < < WAIT RESPONSE > > indication
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AUTO FLIGHT 自動飛行2(71)