R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
 5. Close-up
________
 Subtask 22-70-00-860-081

 A. Put the aircraft back to its initial configuration.
 Subtask 22-70-00-862-065

 B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 INTENTIONALLY BLANK

R 1 1

22-70-00Page 314
1 1 Aug 01/05 1 1 1CES 1

R **ON A/C 062-099,

R  TASK 22-70-00-610-006-B 
R  Download the FM Data 
R  1. Reason for the Job__________________ 
R  Download the FM DATA with the Portable Data Loader (PDL) or with a 
R  floppy-disk data loader (SUNDSTRAND/ALLIED SIGNAL or equivalent). 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific circuit breaker(s) safety clip(s) 
R  PS4084544-103 1 FM BITE DOWNLOAD TOOL 
R  YV68A110 1 PORTABLE DATA LOADER 
R  B. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  24-41-00-861-002 Energize the Aircraft Electrical Circuits from the 
R  External Power 
R  24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied 
R  from the External Power 
R  3. Job Set-up__________ 
R  Subtask 22-70-00-860-084 
R  A. Aircraft Maintenance Configuration 
R  (1) Energize the aircraft electrical circuits 
R  (Ref. TASK 24-41-00-861-002). 
R  (2) Make sure that the electronics rack ventilation is in operation. 
R  (3) Make sure that the aircraft is in the ground configuration. 

R Subtask 22-70-00-865-097

R B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 49VU AUTO FLT/FMGC/1 10CA1 B02 R 49VU AUTO FLT/MCDU/1 11CA1 B01 R 121VU AUTO FLT/FMGC/2 10CA2 M17 R 121VU AUTO FLT/MCDU/2 11CA2 N20
R Subtask 22-70-00-865-098
R C. Open, safety and tag this(these) circuit breaker(s):
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 121VU COM NAV/ACARS/MU 2RB L06
R 4. Procedure
_________
R Subtask 22-70-00-610-065
R A. Downloading of the FM BITE Data
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the center pedestal, on the
R MCDU1(2):
R - turn the BRT knob to adjust the
R brightness.

R 2. Open the circuit breakers 10CA1,
R 10CA2, 11CA1 and 11CA2.

R 3. On the PORTABLE DATA LOADER
R (YV68A110):
R - set the ON/OFF switch to OFF.
R - connect the connecting cable to
R the loader connector.

R 4. On the panel 52VU:

MCDU1 and 2 go blank.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R  - remove the FMS LOAD blanking 
R  plate. 
R  - connect the connecting cable to 
R  the SYST1 connector. 
R  5. Close the circuit breaker 11CA1. 
R  6. On the portable data loader: 
R  - set the ON/OFF switch to ON. 
R  7. Close the circuit breaker 10CA1. 
R 
R 
R 
R  8. On the portable data loader: 
R  - put the FM BITE DOWNLOAD TOOL 
R  (PS4084544-103) into the disk 
R  drive. 
R  9. On the portable data loader: 
R  - eject the floppy disk. 
R  - set the ON/OFF switch to OFF. 
R  10. Open the circuit breakers 10CA1 
R  and 11CA1. 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM AUTO FLIGHT 自動飛行2(73)