**ON A/C 216-216,
4. Fault Isolation
_______________
**ON A/C 216-216,
Post SB 23-1208 For A/C 216-216,
A. If the images from cameras 2 and 3 are good and the images from camera 1 are bad, and the green LED is on:
- replace the CAMERA-COCKPIT DOOR (12RA), (Ref. AMM TASK 23-72-51-000-001) and (Ref. AMM TASK 23-72-51-400-001).
(1) If the fault continues:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
(2) If the fault continues:
- do a check and if necessary repair the wiring between the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) and the CAMERA-COCKPIT DOOR (12RA), (Ref. ASM 23-72/01).
B. Do the test given in Para. 3.
**ON A/C 216-216,
TASK 23-72-00-810-803 Camera 2 Failure
1. Possible Causes
_______________
- CAMERA-DR 1, RH (14RA)
- MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-72-00-740-001 BITE Test of the Anti-Hijack Camera-Monitoring-System AMM 23-72-22-000-001 Removal of the Monitor (10RA) AMM 23-72-22-400-001 Installation of the Monitor (10RA) AMM 23-72-51-000-001 Removal of the Anti-Hijack-System Cameras AMM 23-72-51-400-001 Installation of the Anti-Hijack-System Cameras ASM 23-72/01
3. Fault Confirmation
__________________ **ON A/C 216-216, Post SB 23-1208 For A/C 216-216,
A. Test
(1) Do the BITE test of the Cockpit Door Surveillance System (CDSS) (Ref. AMM TASK 23-72-00-740-001).
**ON A/C 216-216,
4. Fault Isolation
_______________
**ON A/C 216-216,
Post SB 23-1208 For A/C 216-216,
A. If the message "Camera 2 No Video/IR Fail" shows on the LCD monitor, camera 2 images do not show (cameras 1 and 3 images show), and the green LED flashes:
- replace the CAMERA-DR 1, RH (14RA), (Ref. AMM TASK 23-72-51-000-001) and (Ref. AMM TASK 23-72-51-400-001).
(1) If the fault continues:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
(2) If the fault continues:
- do a check and if necessary repair the wiring between the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) and the CAMERA-DR 1, RH (14RA), (Ref. ASM 23-72/01).
B. If the message "Camera 2 No Video Signal" shows on the LCD monitor, camera 2 images do not show (cameras 1 and 3 images show), and the green LED flashes:
- replace the CAMERA-DR 1, RH (14RA), (Ref. AMM TASK 23-72-51-000-001) and (Ref. AMM TASK 23-72-51-400-001).
(1) If the fault continues:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
(2) If the fault continues:
- do a check and if necessary repair the wiring between the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) and the CAMERA-DR 1, RH (14RA), (Ref. ASM 23-72/01).
C. If the message "Camera 2 No Video Power & Camera 2 No Power/IR Fail" shows on the LCD monitor, camera 2 images do not show (cameras 1 and 3 images show), and the green LED flashes:
- replace the CAMERA-DR 1, RH (14RA), (Ref. AMM TASK 23-72-51-000-001) and (Ref. AMM TASK 23-72-51-400-001).
(1) If the fault continues:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 216-216, ∞∞23-72-00∞∞∞∞∞∞∞∞∞∞Page 206
May 01/03 CES (2) If the fault continues:
- do a check and if necessary repair the wiring between the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) and the CAMERA-DR 1, RH (14RA), (Ref. ASM 23-72/01).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊2(31)
