-------------------------------------------------------------------------------
Open the right aft Make sure that the white SLIDE ARMED
 passenger/crew-door with the escape indicator light of the aft right
 slide handle in the ARMED position. passenger/crew-door is on.
 4. Fault Isolation
_______________
 A. If the test confirms the fault:
 - do a check of the circuit breaker 15WN status (Ref. ASM 52-73/01).
 (1) If the circuit breaker is closed:
 - do a check for 28VDC at pin A of the indicator light (3WN2) (Ref. ASM 52-73/01).
 (a) If there is 28VDC
 - replace the IND LT-SLIDE ARMED, AFT R DOOR (3WN2), (Ref. AMM TASK 52-73-21-000-001) and (Ref. AMM TASK 52-73-21-400-001).
 1 If the fault continues:
_
 - do a check for a ground signal at pin C of the proximity switch (17WV2), (Ref. ASM 31-54/05).
 a If there is a ground signal:
_
 - do a check and repair the wiring from the proximity switch (17WV2) to the indicator light (3WN2), pin B to pin F, (Ref. ASM 31-54/05) and (Ref. ASM 52-73/01).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞52-13-00∞∞∞∞∞∞∞∞∞∞Page 236
 Nov 01/03R CES

 b If there is no ground signal:
_
 - repair the wiring from the proximity switch (17WV2) pin C to the ground, (Ref. ASM 31-54/05).
 (b) If there is no 28VDC:
 - do a check and repair the wiring from the indicator light (3WV2) to the indicator light (2WN2) pin A to pin B, (Ref. ASM 52-73/01) and (Ref. ASM 52-73/01).
 1 If the fault continues:
_
 - replace the IND LT-SLIDE ARMED, R EMER EXIT (2WN2), (Ref. AMM TASK 52-73-21-000-001) and (Ref. AMM TASK 52-73-21-400-001).
 2 If the fault continues:
_
 - do a check and repair the wiring from the indicator light (2WN2) to the indicator light (1WN2) pin A to pin B (Ref. ASM 52-73/01).
 3 If the fault continues:
_
 - replace the IND LT-SLIDE ARMED, FWD R DOOR (1WN2), (Ref. AMM TASK 52-73-21-000-001) and (Ref. AMM TASK 52-73-21-400-001).
 4 If the fault continues:
_
 - do a check and repair the wiring from the indicator light (1WV2) to the relay (12WN) pin A to pin A/A2 (Ref. ASM 52-73/01).
 5 If the fault continues:
_
 - replace the RELAY-PWR SPLY SWITCHOVER (12WN), (Ref. ASM 52-73/01).
 6 If the fault continues:
_
 - do a check and repair the wiring from the relay (12WN) to the circuit breaker (15WN) pin A/A1 to pin 2 (Ref. ASM 52-73/01).
 7 If the fault continues:
_
 - replace the C/B-EIS/SLIDES/ARM AND WARN/FLT (15WN), (Ref. ASM 52-73/01).
 (2) If the circuit breaker is open:
 - close it.
 (a) If it opens again:
 - replace the indicator light (3WN2) (Ref. AMM 52732100000100) and (Ref. AMM 52732140000100).
 1 If the fault continues:
_
 - replace the indicator light (2WN2) (Ref. AMM 52732100000100) and (Ref. AMM 52732140000100).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞52-13-00∞∞∞∞∞∞∞∞∞∞Page 237
 Nov 01/03R CES

 2 If the fault continues:
_
 - replace the indicator light (1WN2) (Ref. AMM 52732100000100) and (Ref. AMM 52732140000100).
 3 If the fault continues:
_
 - replace the relay (12WN) (Ref. ASM 52-73/01). 4 If the fault continues:
_
 - Do a check for a short to ground at the wiring from the circuit breaker (15WN) to the indicator light (3WN2) pin 2 to pin A (Ref. ASM 52-73/01).
 a If there is a short to ground:
_
 - repair the related wiring. b If there is no short to ground:
_
 - replace the circuit breaker 15WN.
 (b) If the circuit breaker stays closed and the fault continues:
 - replace the indicator light (3WN2) (Ref. AMM 52732100000100) and (Ref. AMM 52732140000100).
 1 If the fault continues:
_
 - replace the indicator light (2WN2) (Ref. AMM 52732100000100) and (Ref. AMM 52732140000100).
 2 If the fault continues:
_
 - replace the indicator light (1WN2) (Ref. AMM 52732100000100) and (Ref. AMM 52732140000100).
 3 If the fault continues:
_
 - replace the relay (12WN) (Ref. ASM 52-73/01).
 B. Test
　
中國(guó)航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 艙門(mén) DOORS(58)