F 『
E C F M E
E E
E 56 E
E E
TASK 71-50-00-810-822
Loss of the A/THR Control on Engine 1
1. Possible Causes
_______________
- A/THR 1 relay (5CA1)
- harness J3
- ECU (4000KS)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 71-51-43-000-044 Removal of the Thrust Reverser (Channel A and B) Harness (4200KS) AMM 71-51-43-400-044 Installation of the Thrust Reverser (Channel A and B) Harness (4200KS) R AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)(4000KS) AMM 73-21-60-400-001 Installation of the Electronic Control Unit R (ECU)(4000KS) AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with Engine non Motoring) ASM 73-25/12
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 1B on the ground (with engine non motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance message J3 (INSTINCT DISC):
- do a visual check of the connector J3 at the ECU (4000KS) for integrity (Ref. ASM 73-25/12).
(1) If the fault continues:
- do a check for open circuit at the harness J3 between pins 6 and
31.
(2) If the fault continues:
- replace the A/THR 1 relay (5CA1) (Ref. ASM 73-25/12).
(3) If the fault continues:
- replace the harness J3 (Ref. AMM TASK 71-51-43-000-044) and (Ref. AMM TASK 71-51-43-400-044).
F 『 EEFF : ALL E ∞∞71-50-00∞∞∞∞∞∞∞∞∞∞Page 241
E E Aug 01/99 E E ECES
E F 『 E C F M E E E E 56 E E E (4) If the fault continues:
- replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM TASK 73-21-60-400-001).
B. Do the test given in Para. 3.A.
F 『 EEFF : ALL E ∞∞71-50-00∞∞∞∞∞∞∞∞∞∞Page 242
E E Aug 01/99 ERE
ECES E
F 『
E C F M E
E E
E 56 E
E E
TASK 71-50-00-810-823
Loss of the A/THR Control on Engine 2
1. Possible Causes
_______________
- RELAY - A/THR 2 INST DISC
- harness J3
- ECU (4000KS)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 71-51-43-000-044 Removal of the Thrust Reverser (Channel A and B) Harness (4200KS) AMM 71-51-43-400-044 Installation of the Thrust Reverser (Channel A and B) Harness (4200KS) R AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)(4000KS) AMM 73-21-60-400-001 Installation of the Electronic Control Unit R (ECU)(4000KS) AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with Engine non Motoring) ASM 73-25/12
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 2B on the ground (with engine non motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance message J3 (INSTINCT DISC):
- do a visual check of the connector J3 at the ECU (4000KS) for integrity (Ref. ASM 73-25/12).
(1) If the fault continues:
- do a check for open circuit at the harness J3 between pins 6 and
31.
(2) If the fault continues:
- replace the RELAY - A/THR 2 INST DISC (Ref. ASM 73-25/12).
(3) If the fault continues:
- replace the harness J3 (Ref. AMM TASK 71-51-43-000-044) and (Ref. AMM TASK 71-51-43-400-044).
F 『 EEFF : ALL E ∞∞71-50-00∞∞∞∞∞∞∞∞∞∞Page 243
E E Aug 01/99 E E ECES
E F 『 E C F M E E E E 56 E E E (4) If the fault continues:
- replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM TASK 73-21-60-400-001).
B. Do the test given in Para. 3.A.
F 『 EEFF : ALL E ∞∞71-50-00∞∞∞∞∞∞∞∞∞∞Page 244
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 動力裝置 POWER PLANT(22)
