(b)
Let the primer dry (minimum of 10 minutes and maximum of 60 minutes) at 70° to 90°F before you apply the Nextel Suede 3101.
S 377-015-B00
(4) Mix the Nextel Suede 3101:
(a) Add 1 part (by volume) of the catalyst component II to 8 parts (by volume) of the base component I.
NOTE: The usual life of the mixture without the promoter
____ component III is 8 hours. If you add the promotor component III, the pot life of the mixture decreases approximately 4 to 6 hours.
(b)
Shake the mixture for 15 minutes.
(c)
Add 1/3 part (by volume) of the thinner.
NOTE: MEK or Xylene, or a mixture of MEK and Xylene can make
____ the mixture thin. If you use the mixture of MEK and Xylene, the materials must be equal in quantity.
(d)
Do not touch or move the mixture for 15 minutes before you use it.
(e)
Make sure the mixture is free from unwanted particles.
S 937-009-B00
(5) Identify the container with a label.
(a) Write the date and the hour when the mixture was mixed and when the pot life comes to an end.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-93
ALL ú ú B01 Page 703 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 377-016-B00
(6) Apply the Nextel Suede 3101 with a spray gun.
(a) Make sure the dry layer of the Nextel Suede 3101 is 2-3 mils (0.002-0.003 inch) thick.
NOTE: If the thickness is more than the specified limits,
____
cracks can occur on the surface.
(b) Dry the Nextel Suede 3101 (Fig. 701).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-93
ALL ú ú B01 Page 704 ú Nov 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
TEMPERATURE (`F)
90
80
70
60
50
BRUSH SPRAY
MIXTURE MIXTURE
30 60 90 120 150 180 210
TIME (MINUTES)
Pot Life of Tereco 155
Figure 701
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-94
ALL ú ú B01 Page 701 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E79526
A 737-300/400/500MAINTENANCE MANUAL
MAXIMUM CURE TEMPERATURE (160`F)200
TEMPERATURE (`F)
150
B TEMPERATURE (70`F) MINIMUM CURE
A
100
50
02468 12 16 20 24
TIME (HOURS)
Cure of Tereco 155
Figure 702
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-94
ALL ú ú B01 Page 702 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
ABRASION RESISTANT MOLYBDENUM DISULFIDE FINISH
______________________________________________
-CLEANING/PAINTING
___________________
1. General_______
A. This procedure contains the task to apply the abrasion resistant molybdenum disulfide finish. The procedure has these parts:
(1)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 結構 STRUCTURES(40)
