(2)  
Portable Blaster - Edul-O-Matic E10A, Clementina LTD., San Francisco, California

 B.  Consumable Materials
 (1)  
B00148 Solvent - Methyl Ethyl Ketone (MEK), TT-M-261

 (2)  
E00017 Scrapper - Hardwood

 (3)  
G00000 Grit - Abrasive, Aluminum Oxide Grit - No. 154 (600-4F mesh)

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 51-21-95
 ALL  ú ú B01 Page 701 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

WING PLAN VIEW
____PLAN VIEW OF RIGHT WINGNOTE: (LEFT OPPOSITE)
Skin and Fastener Corrosion Control Location
Figure 701

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 51-21-95
 ALL  ú ú B01 Page 702 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (4)  
G00382 Paper - Abrasive, Aluminum Oxide, 240 grit

 (5)  
G00000 Gloves - Clean

 (6)  
G02057 Goggles - Safety

 C. References
 (1)  
51-21-11/701, Paint Stripping

 (2)  
51-21-31/701, Corrosion Removal and Control

 D. Procedure
 S 117-001-B00
 (1)  
Remove corrosion preventative paint in the area where there is corrosion (Ref 51-21-11/701).

 S 117-017-B00

 (2)  
Remove BMS 10-11, type 1 or BMS 10-20 primers.

 (a)  Lightly rub the primer smooth with abrasive paper to the area immediately adjacent to the corrosion.
 S 147-036-B00
 (3)  Use a hardwood scrapper to remove the fastener sealant.
 S 117-035-B00
 WARNING: DO NOT GET METHYL ETHYL KETONE (MEK) IN YOUR MOUTH OR EYES, OR
_______ ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM MEK. PUT ON A PROTECTIVE SPLASH GOGGLE AND GLOVES WHEN YOU USE MEK. KEEP MEK AWAY FROM SPARKS, FLAME, AND HEAT. MEK IS A POISONOUS AND FLAMMABLE SOLVENT WHICH CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (4)  
Remove fastener sealant with methyl ethyl ketone.

 (5)
Apply tape to all fuel tank openings to prevent entry of grit.

 S 167-026-B00

 (6)  
Remove rust and corrosion.

 (a)  
Use a portable blaster to remove rust from fastener heads and adjacent skin area.

 (b)  
Use a portable blaster to remove corrosion from the skin to an approved depth.

 S 957-037-B00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 51-21-95
 ALL  ú ú B01 Page 703 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (c)  
As an alternative, remove rust and corrosion with a 240-grit aluminum oxide paper or cloth.

 (d)  
Use a 5 to 10X magnifying glass to examine the countersunk area around the fastener heads for corrosion.

 CAUTION: MAKE SURE TO REMOVE ONLY ONE ROW OF RIVETS AT A TIME IN A
_______ MORE-THAN-ONE ROW FASTENER CONFIGURATION. REPLACE THESE FASTENERS BEFORE YOU REMOVE THE FASTENERS FROM THE NEXT ROW TO PREVENT SKIN MOVEMENT. IN A ONE ROW CONFIGURATION, REMOVE AND INSTALL EACH SECOND FASTENERS.
 (e)  
Remove the fasteners with corrosion in the countersunk area.

 (f)  
Remove the corrosion from the fastener to an approved depth.

 TASK 51-21-95-307-023-B00
 3. Alodine Treatment Application
_____________________________
 A. Consumable Materials
 (1)  
B00003 Solvent - Alkaline Cleaner, GMC 528B

 (2)  
B00192 Solvent - BMS 3-2, Type I

 (3)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 結構 STRUCTURES(43)