Lower EGT Thermocouple Harness Extension Installation
Figure 403 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
9 PROBE EGT SYSTEM (RIGID MOUNT) ú 77-21-01
ú CONFIG 2 ú C02 Page 414 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
CONNECTOR
Lower EGT Thermocouple Harness Extension Installation
Figure 403 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
9 PROBE EGT SYSTEM (RIGID MOUNT) ú 77-21-01 ú CONFIG 2 ú C02 Page 415 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(c) Put protective caps on the connectors and the receptacles.
S 024-163-C02
(2) Do these steps to disconnect the extension harness:
(a)
Remove the bolt, the nut, and the clamp half that attaches the extension harness to the engine brackets.
(b)
Remove the two bolts, two nuts, and two clamp halves that attach the lower extension harness and the left harness to the engine brackets.
(c)
Remove the two bolts and two nuts that attach the main junction box to the engine flange.
TASK 77-21-01-404-021-C02
7. Lower EGT Extension Harness Installation
________________________________________
A. Equipment
(1) Fork Wrench - AN8508-14, Snap-on Tools Company, 8049-28th St Kenosha, WI 53140
B. References
(1)
AMM 71-11-02/201, Fan Cowl Panels
(2)
AMM 77-21-00/501, EGT Indicating System
(3)
AMM 78-31-00/201, Thrust Reverser System
C. Access
(1)
Location Zones
504 Left Engine - Left Side
604 Right Engine - Left Side
(2)
Access Panels
5738L Left Thrust Reverser - Left Engine
5838R Left Thrust Reverser - Right Engine
D. Procedure
S 434-164-C02
(1) Do these steps to connect the connectors (Fig. 403):
(a) Remove protective caps from the connectors and the receptacles.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
9 PROBE EGT SYSTEM (RIGID MOUNT) ú 77-21-01
ú CONFIG 2 ú C02 Page 416 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(b)
Connect the connector (on the lower extension harness) to the left junction box. 1) Tighten the connector with the fork wrench to
170-190 pound-inches (19-21 N.m).
(c)
Connect the connector (on the lower extension harness) to the lower junction box. 1) Tighten the connector with the fork wrench to
170-190 pound-inches (19-21 N.m).
S 424-065-C02
(2) Do these steps to attach the lower extension harness:
(a)
Install the bolt, the nut, and the clamp half that attaches the extension harness to the engine brackets. 1) Tighten the nut to 30-35 pound-inches (3.5-4 N.m).
(b)
Install the two bolts, two nuts, and two clamp halves that attach the lower extension harness and the left harness to the engine brackets. 1) Tighten the nuts to 30-35 pound-inches (3.5-4 N.m).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發動機指示 ENGINE INDICATIN(30)
