S 865-195
(9)
Release the pressure switch, or hex key.
S 735-197
(10)
Make sure the EICAS message does not show.
S 865-274
(11)
Push and hold the manual override pressure switch, or insert the hex key into the bottle pressure switch cam and turn the key with a maximum of 5.7 pound-inch on the left bottle (M230).
S 735-201
(12)
Make sure the EICAS message "BTL LOW R ENG A" shows.
S 735-227
(13)
Make sure the bottle A discharge ENG 3&4 light on the P5 panel comes on.
(14)
Release the pressure switch, or hex key.
(15)
Make sure the EICAS message does not show.
S 865-202
S 735-266
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-21-00
ALL ú ú 01 Page 518 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 865-205
(16)
Push and hold the manual override pressure switch, or insert the hex key into the bottle pressure switch cam and turn the key with a maximum of 5.7 pound-inch on the right bottle (M231).
S 735-208
(17)
Make sure the EICAS message "BTL LOW R ENG B" shows.
S 735-244
(18)
Make sure the Bottle B Discharge ENG 3&4 light on the P5 panel comes on.
S 865-209
(19)
Release the pressure switch, or hex key.
S 735-211
(20)
Make sure the EICAS message goes off.
S 865-228
(21)
Put the airplane back to its usual condition.
S 865-216
(22)
Close these circuit breakers:
(a) P6, Main Power Distribution Panel
1) 6H1, FIRE EXTINGUISHER ENG 1&3 B
2) 6H2, FIRE EXTINGUISHER ENG 1&3 A
3) 6H3, FIRE EXTINGUISHER ENG 2&4 B
4) 6H4, FIRE EXTINGUISHER ENG 2&4 A
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-21-00
ALL ú ú 02 Page 519 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
FIRE CONTROL MODULE - REMOVAL/INSTALLATION
__________________________________________
1. General_______
A. This procedure contains three tasks. These tasks remove and test install the fire control module, M7326, and the cap assembly for the fire shutoff switch.
B. The fire control module is found on the pilots' overhead panel, P5, in the control cabin. This module has the components that follow.
(1)
The switch handles for the engine fire extinguisher:
(a) The handle light comes on when there is an engine fire. You manually turn the switch handle to let the extinguisher agent come out of the extinguisher.
(2)
The engine bottle discharge lights:
(a) The lights come on when the extinguisher agent releases.
(3)
The APU switch handle:
(a) The handle light comes on when there is an APU fire. You manually turn the switch to release the extinguisher agent.
(4)
The APU bottle discharge light:
(a) The light comes on when the extinguisher agent releases.
(5)
The cargo discharge button:
(a) Push this button to release the fire extinguisher agent for the lower cargo area.
TASK 26-21-01-004-001
2. Remove the Fire Control Module and the Fire Switch (Fig. 401)__________________________________________________
A. References
(1)
AMM 26-21-00/501, Engine Fire Extinguishing System
(2)
AMM 26-22-00/501, APU Fire Extinguishing System
(3)
AMM 26-23-00/501, Lower Cargo Fire Extinguishing System
(4)
AIPC 26-21-05 Fig. 5
(5)
WDM 26-21-01 thru WDM 26-21-14
B. Access
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 防火 FIRE PROTECTION 2(59)
