(b)  
Push the <PRINTER LSK to start the report.

 NOTE: The IN PROGRESS indication is shown while the CMC
____ transmits data to the printer.
 (c)  When the REPORT COMPLETE indication is shown, remove the report from the printer.
 TASK 45-10-00-972-056
 13. ACARS Report of a CDU Display (Fig. 212)
_____________________________
 A. General
 (1)  
If a CDU display has a REPORT> prompt on it, you can make an ACARS report of that display. The CMC sends the report to a ground station through ACARS.

 (2)  
This procedure contains the steps to make a report of a CDU display that has a REPORT> prompt on it.

 B. Access
 (1)  Location zones
 221 Control Cabin, LH
 222 Control Cabin, RH

 C. Procedure
 S 972-057
 (1)  Make an ACARS report of the CDU display:
 (a)  
Push the REPORT> LSK to show the REPORT menu on the CDU.

 (b)  
Push the <ACARS LSK to start the report.

 NOTE: The IN PROGRESS indication is shown while the CMC
____ transmits data to the ACARS management unit (MU). The COMPLETE TO MU indication shows that the data was transmitted to the ACARS MU. The COMPLETE TO GROUND indication shows that the data was transmitted to the ground station.
 S 862-058
 (2)  Make sure the COMPLETE TO GROUND indication is shown.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 45-10-00
 ALL  ú ú 17 Page 248 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE/CMCS BITE MANUAL

ACARS Report
Figure 212

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 45-10-00
 ALL  ú
 ú  07  Page 249
 ú  Jun 10/95 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 CENTRAL MAINTENANCE COMPUTER SYSTEM - ADJUSTMENT/TEST
_____________________________________________________
 1.  General_______
 A.  This subject has three tasks. The first task is an operational test of the central maintenance computer system (CMCS). The second task is a ground test of the multiple-input printer. The third task is a system test of the CMCS.
 TASK 45-10-00-715-043
 2.  Operational Test - Central Maintenance Computer System______________________________________________________
 A.  General
 (1)  This task contains a procedure which makes sure that the left central maintenance computer (CMC) and the right CMC are serviceable.
 B.  References
 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 34-61-02/401, Control Display Unit

 C.  Access
 (1)  Location Zones
 221 Control Cabin, LH
 222 Control Cabin, RH

 D.  Preconditions
 S 865-129
 (1)  These conditions are necessary for this task:
 (a)  
Electrical power on (AMM 24-22-00/201).

 (b)  
CDU installed (AMM 34-61-02/401).

 E.  Left CMC Test
 S 865-000
 (1)  
Supply electrical power (AMM 24-22-00/201)

 S 865-092

 (2)  
Show the CMC MENU on the CDU:

 (a)  
Push the MENU key on the CDU to show the MENU.

 (b)  
Push the line select key (LSK) that is adjacent to <CMC to show the CMC MENU.

 (c)  
If <RETURN shows after you push the LSK, push the LSK that is adjacent to <RETURN until you see the CMC MENU.

 S 715-095
 (3) Make sure that CMC-L MENU shows at the top of the display.
 NOTE:____The left CMC is serviceable if CMC-L MENU shows. The left CMC is not serviceable if CMC-R MENU shows.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 中央維護計算機系統(45)