(7)
Make sure that this indication shows adjacent to PROG PINS: 4
S 755-064
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
45-10-00
ALL ú ú 05 Page 505 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
G. Configuration Check of The Right CMC
S 865-069
(1) Show the CONFIGURATION DATA page for the right CMC on a CDU:
(a)
Push the LSK that is adjacent to <RETURN.
(b)
Push the LSK that is adjacent to <CMC-R.
(c)
Make sure that CMC-R shows on the CONFIGURATION DATA page.
S 755-111
(2) Make sure that the correct CMC option code shows adjacent to OC-A and OC-B (AMM 45-10-01/201).
S 755-070
CAUTION: MAKE SURE YOU KNOW THE CORRECT SOFTWARE PART NUMBER FOR THE
_______ CMC, WHEN YOU LOOK AT THE SOFTWARE PART NUMBER ON THE CDU. FOR THE CMC TO BE AN APPROVED INSTALLATION, THE CORRECT SOFTWARE PART NUMBER MUST BE INSTALLED.
(3) Make sure that the correct CMC software part number shows adjacent to S/W.
(a) If the part number is incorrect, install software in the right CMC (AMM 45-10-10/201).
S 755-097
(4)
Make sure that the part number of the airline data base shows adjacent to ALDB.
(a) If the part number does not show or is incorrect, install the airline data base in the right CMC (AMM 45-10-10/201).
(5)
Make sure that this indication shows adjacent to EIU: PW -XXX
S 755-115
NOTE: XXX is the IDS software version number.
____
S 755-116
(6) Make sure that the numbers XXX agree with the last three digits of the IDS software part number on the CONFIG page on the auxiliary EICAS.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
45-10-00
ALL ú ú 08 Page 506 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
(7) S 755-086Make sure that this indication shows adjacent to PROG PINS: 8
(8) S 865-074Remove the electrical power if it is not necessary (AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
45-10-00
ALL ú ú 09 Page 507 ú Feb 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
CENTRAL MAINTENANCE COMPUTER - OPTION CODE INSTALLATION
_______________________________________________________
1. General_______
A. This subject has one task. The task is to install the option code in the central maintenance computer (CMC).
B. It is necessary to use one of the CDUs to install the option code.
TASK 45-10-01-472-061
2. CMC Option Code Installation____________________________
A. General
(1)
The CMC must contain the correct option code. Without a satisfactory option code, the CDU shows only the CMC CONFIGURATION DATA page when you push the <CMC LSK. You cannot use the other CMC functions until the CMC contains a satisfactory option code.
(2)
Option code installation is necessary after you replace the two CMCs or after you install software in the two CMCs. Some service bulletins also refer you to this procedure to change the option code. The option code is automatically transmitted from one CMC to the other. Thus, it is necessary to install the option code only once for the two CMCs. It is not necessary to install the option code after you replace only one CMC or after you install software in only one CMC.
B. References
(1) AMM 24-22-00/201, Manual Control
C. Access
(1) Location Zones
221 Control Cabin, LH
222 Control Cabin, RH
D. Prepare for the Option Code Installation 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 中央維護計算機系統(48)
