(4) Clean the area with solvent, Series 84 (AMM 20-30-84). Use a brush or spray gun.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-01
ALL ú ú 01 Page 706 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
~.............................................................................
| TYPE OF | | | | | |
| ORGANIC | | | | | |
| FINISH | APPROVED | | | | OPERATING |
| TO BE | METAL | MEANS OF | TYPE OF | APPROVED | TEMPERATURE |
| REMOVED | SUBSTRATES | APPLICATION | STRIPPER | STRIPPER | (°F) |
............................................................................... |PRIMERS, | ALL | WIPE OR | SOLVENT |BUTYL CELL- | ROOM | |WAX,OVER | | SQUIRT-ON | | OSOLVE, | | |SPRAY,AND| | | |METHYL |(NOT MORE | |TEMPORARY| | | |ISOBUTYL |THAN 90°F) | |COATINGS | | | |KETONE | | | | | | |ETHYL ALCO- | | | | | | |HOL, XYLENE,| | | | | | |TOLUENE, | | | | | | |TURCO 800 | | ............................................................................... |ALL |ALL EXCEPT | SPRAY ON |SOLVENT | CEE BEE |50-100°F | |FINISHES |STEEL HEAT-| BRUSH-ON |NON-| A-306B |RECOMMENDED | | |TREATED ABOVE| |PHENOLIC | |65-800°F | | |220 KSI | |NON-| | | | | | |CHROMATED | | | | | | | | | | | | | |SOLVENT | TURCO | | | | | |NON-| 5878 |50-100F | | | | |PHENOLIC | |RECOMMENDED | | | | |CHROMATED |PENNWALT |65-80°F | | | | | |EZ STRIP 19E| | ............................................................................... |ADHESIVES| ALUMINUM | SPRAY ON | SOLVENT |ALCOR LO-|50-100°F | |*[1] | | BRUSH-ON | |2030N FIBER-|RECOMMENDED | | | | | |RESIN ES1 |65-80°F | | | | | |TURCO 5351 | | | | | | | (THICK)| | | | | | |TURCO 5351 | | | | | | | (THIN) | | ............................................................................... |*[2] |ALL EXCEPT | SPRAY OR | SOLVENT |TURCO 5292B |50-100°F | | |STEEL HEAT-| BRUSH-ON | |TURCO 5351 |RECOMMENDED | | |TREATED ABOVE| | | (THICK)|65-80°F | | |220 KSI | | | | | ............................................................................... |ALL | ALL | SPRAY OR | SOLVENT |TURCO 5292B |50-100°F | |EXCEPT | | BRUSH-ON | |CEE BEE |RECOMMENDED | |*[1] AND | | | |A-228-D |65-80°F | |*[2] | | | |TURCO 5351 | | | | | | | (THICK)| | 2.........….............…..............…...........…............….............1
*[1] EPON 933, EPON 9303, BMS 5-42, 5-51, 5-70, 5-80, 5-89
*[2] BMS 10-53, 10-39; EPOXY PRIMER, EPOXIES, POLYURETHANES
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-01
ALL ú ú 01 Page 707 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
TASK 51-21-01-107-004
3. Remove Rain Erosion Coating from Fiberglass
___________________________________________
A. Equipment
(1) Clothing - Protective
B. Consumable Materials
(1)
B00094 Solvent - Toluene (Toluol), TT-T-548, Flash Point 40°F
(2)
B00344 Solvent - Xylene, TT-X-916, Flash Point 81°F
(3)
G00382 Paper - Abrasive, Aluminum Oxide, 240-Grit (minimum)
(4)
G00034 Cheesecloth - Clean and Lint-Free
(5)
G00507 Cloth - Clean and Lint-Free
(6)
G00252 Film - Polyethylene
(7)
G00317 Tape - Masking, Aluminum Foil
C. Procedure
S 157-005
(1) Place cloths that are moist with toluene on the rain erosion coating.
S 157-006
CAUTION: MAKE SURE THE TOLUENE DOES NOT TOUCH THE FIBERGLASS FOR MORE
_______ THAN 2 HOURS. DAMAGE TO THE SURFACE CAN OCCUR IF THE STRIPPER TOUCHES THE SURFACE FOR A LONG TIME.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 結構 STRUCTURES(15)
