P.O. Box 1300
 Lodi, NJ 07644-9982

 C.
Consumable Materials

 (1)  
A00456 Compound - Antigalling (PWA 550)

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 71-00-00
 ALL  ú ú N03 Page 582A ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
TEST NO. 13 - ENGINE MAIN OIL PRESSURE
______________________________________
 (2)  
D00453 Compound - Antigalling (PWA 36035)

 (3)  
G02332 Ferrule, Safety Cable (P05-292)

 (4)  
G02334 Lockwire, (P05-289) 0.032 inch (0.813 mm) - AS3214-02

 (5)  
G02335 Cable, Safety (P05-291)

 D.
References

 (1)  
AMM 71-00-00/201, Power Plant

 (2)  
AMM 71-00-00/501, Power Plant

 (3)  
AMM 71-11-04/201, Fan Cowl Panels

 (4)  
AMM 71-11-06/201, Core Cowl Panels

 (5)  
AMM 78-31-00/201, Thrust Reverser System

 E.
Access

 (1)  
Location Zones
 221,222 Control Cabin
 412 Engine 1
 422 Engine 2
 432 Engine 3
 442 Engine 4

 (2)  
Access Panels
 415 Left Thrust Reverser Half - Engine 1
 425 Left Thrust Reverser Half - Engine 2
 435 Left Thrust Reverser Half - Engine 3
 445 Left Thrust Reverser Half - Engine 4

 F.
Procedure

 S 795-065-N00
 CAUTION: KEEP PNEUMATIC POWER SUPPLIED DURING THE TEST IF IT IS
_______
 NECESSARY TO MOTOR THE ENGINE.

 CAUTION: KEEP HYDRAULIC SYSTEM 1 PRESSURIZED TO MAKE SURE YOU HAVE
_______ POSITIVE CONTROL OF THE NOSE GEAR STEERING. KEEP HYDRAULIC SYSTEM 4 PRESSURIZED TO MAKE SURE YOU HAVE POSITIVE CONTROL OF THE MAIN GEAR BRAKES. IF YOU DO NOT HAVE CONTROL OF THE AIRPLANE, DAMAGE TO THE AIRPLANE CAN OCCUR.
 (1)  Do Test No. 3 - Ground Test - Idle Power to make sure there are no leaks.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 71-00-00
 ALL  ú ú N03 Page 582B ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
TEST NO. 13 - ENGINE MAIN OIL PRESSURE
______________________________________
 S 865-222-N00
 WARNING:_______USE AMM 71-00-00/201 TO OPERATE THE POWER PLANT. IF YOU DO NOT USE THIS PROCEDURE, YOU CAN CAUSE DAMAGE TO EQUIPMENT OR INJURY TO PERSONS.
 (2)  Use the Power Plant Operation (Normal) procedure to start the engine (AMM 71-00-00/201).
 (a)  Let the engine become stable at minimum idle for 5 minutes.
 S 865-159-N00
 (3)  Make sure the engine indications during the operation are in operation limits and make sure there are no leaks.
 NOTE: If an engine turns at speeds below idle, a small quantity
____ of oil leakage can occur. It comes through the carbon seal assembly for the No. 2 bearing. This usually occurs when the engine turns at low speeds for an extended time (when an engine has an extended start/shutdown or when an engine turns freely in the wind). After the engine shutdown, this oil leakage can be on the retention bolts for the variable stator vane at the bottom of the engine. It can also be on the bottom of the nose cone/spinner. This small quantity of oil leakage is permitted.
 S 975-212-N00
 (4)  Make a record of the N2 and OIL P indications shown on the auxiliary EICAS.
 S 865-241-N00
 WARNING: MAKE SURE THE BRAKES OPERATE CORRECTLY AND NO PERSONS ARE IN
_______ THE AREA OF THE HIGH SPEED EXHAUST. IF YOU DO NOT OBEY THIS INSTRUCTION, INJURY TO PERSONS CAN OCCUR.
 (5)  Slowly move the thrust lever forward to the 1.3 EPR position.
 (a)  Let the engine become stable.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 動力裝置 POWER PLANT 1(91)