EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
80-11-02
ALL ú ú N05 Page 406 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 414-043-N00
(4) Close the core cowl panels (AMM 71-11-06/201).
S 444-046-N00
(5) Do the activation procedure for the thrust reverser (AMM 78-31-00/201).
S 864-033-N00
(6) For the applicable engine, remove these DO-NOT-CLOSE tags and close these circuit breakers:
(a) P6 Main Power Distribution Panel 1) 6G15 SCU ALT PWR ENG 1 2) 6G23 ENG SCU 1 3) 6G16 SCU ALT PWR ENG 2 4) 6G24 ENG SCU 2 5) 6G17 SCU ALT PWR ENG 3 6) 6G25 ENG SCU 3 7) 6G18 SCU ALT PWR ENG 4 8) 6G26 ENG SCU 4 9) 6J18 ENG START AIR CONT
S 714-034-N00
(7) Do the operational test for the engine starting system (AMM 80-11-00/501).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
80-11-02
ALL ú ú N03 Page 407 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
STARTER QAD ADAPTER - REMOVAL/INSTALLATION
__________________________________________
1. General
_______
A. This procedure gives the tasks to remove and install the quick
attach-detach (QAD) adapter for the starter.
B. The QAD adapter is between the starter and the main gearbox.
C. You can get access to the QAD adapter when you open the thrust reverser halves and remove the starter.
TASK 80-11-03-004-001-N00
2. Starter QAD Adapter Removal (Fig. 401)
___________________________
A. References
(1)
AMM 80-11-01/401, Starter
(2)
IPC 80-11-03 Fig. 1
B. Access
(1)
Location Zone 412 Engine 1 - Main Gearbox Aft Face 5 o'clock 422 Engine 2 - Main Gearbox Aft Face 5 o'clock 432 Engine 3 - Main Gearbox Aft Face 5 o'clock 442 Engine 4 - Main Gearbox Aft Face 5 o'clock
(2)
Access Panel 415 and 416 Thrust Reverser Halves - Engine 1 425 and 426 Thrust Reverser Halves - Engine 2 435 and 436 Thrust Reverser Halves - Engine 3 445 and 446 Thrust Reverser Halves - Engine 4
C. Procedure
S 014-002-N00
(1)
Remove the starter (AMM 80-11-01/401).
S 024-013-N00
(2)
Remove the starter QAD adapter:
(a)
Remove the bolts and the washers that attach the starter QAD adapter to the main gearbox.
(b)
Remove the starter QAD adapter from the main gearbox.
(c)
Remove the gasket for the starter QAD adapter. 1) Discard the gasket.
TASK 80-11-03-404-006-N00
3. Starter QAD Adapter Installation (Fig. 401)
________________________________
A. Consumable Materials
(1) G00834 Cloth - Cotton, Lint-free
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
80-11-03
ALL ú ú N01 Page 401 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE A
MAIN GEARBOX
QAD ADAPTER
SEE BFWD STARTER
A
BOLT AND WASHER (6 LOCATIONS)
HYDRAULIC PUMP (REF)
GASKET
QAD ADAPTER
B
Starter QAD Adapter Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 起動 STARTING(16)
