(2)  
AMM 71-11-06/201, Core Cowl Panels

 (3)  
AMM 78-31-00/201, Thrust Reverser System

 B.  Access
 (1)  
Location Zone
 412 Engine No. 1
 422 Engine No. 2
 432 Engine No. 3
 442 Engine No. 4

 (2)  
Access Panel
 415 and 416 Thrust Reverser - Engine No. 1
 425 and 426 Thrust Reverser - Engine No. 2
 435 and 436 Thrust Reverser - Engine No. 3
 445 and 446 Thrust Reverser - Engine No. 4

 C.  Prepare to Remove the Starter
 S 864-002-N00
 (1)  Open this circuit breaker on the main power distribution panel, P6, and attach the DO-NOT-CLOSE tag:
 (a)  6J18, ENG START AIR CONT
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 80-11-01
 ALL  ú ú N01 Page 401 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE A
HYDRAULIC PUMP (REF) 
START VALVE (REF)  MAIN GEARBOX 
1.  INTERCONNECT DUCT  STARTER2.  A  SEE B 2. STARTER ATTACH-DETACH ADAPTER QUICK  FWD 
6. 5.  COUPLING (2 PLACES) SEAL (2 PLACES)  3.  ATTACH-DETACH CLAMP QUICK 
B  PACKING4. 
Starter Installation Figure 401 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 80-11-01
 ALL  ú ú N01 Page 402 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 014-021-N00
 (2)  Open the fan cowl panels (AMM 71-11-04/201).
 S 044-023-N00
 WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
 (3)  
Do this procedure: Thrust Reverser Deactivation for Ground
 Maintenance (AMM 78-31-00/201).

 S 014-022-N00

 (4)  
Open the core cowl panels (AMM 71-11-06/201).

 S 014-024-N00
 WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU OPEN THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
 (5)  Open the thrust reverser (AMM 78-31-00/201).
 D.  Procedure
 S 024-033-N00
 (1)  Remove the starter:
 (a)  
Do these steps to remove the interconnect duct (1): 1) While you hold the interconnect duct (1), remove the

 couplings (5). 2) Remove the interconnect duct (1) from the engine. 3) Remove the seals (6).

 (b)
Do these steps to remove the starter from the engine:

 CAUTION:_______DO NOT LIFT THE STARTER BY THE DRIVE SHAFT. INTERNAL DAMAGE TO THE STARTER CAN OCCUR.
 1) While you hold the starter (2), remove the QAD clamp (3). 2) Move the starter (2) aft until the splines on the starter drive shaft are free from the starter drive coupling.
 3)  Remove the starter from the engine. a) Remove and discard the packing (4).
 (c)  Install caps on the start valve, the interconnect duct (1), the starter (2) and the main gearbox openings.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 80-11-01
 ALL  ú ú N01 Page 403 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
TASK 80-11-01-404-009-N00
 3. Install the Starter
___________________
 A. Consumable Materials
 (1)
D00390 Oil - Engine

 (2)
D50033 Grease, Fluorinated Lubricant - Krytox 283 (P06-059)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起動 STARTING(9)