(1)  
Supply electrical power (Ref 24-22-00).

 S 864-005

 (2)  
Open these circuit breakers on the overhead panel, P11, and attach DO-NOT-CLOSE tags:

 (a)  
11J14, AILERON POS LEFT

 S 864-004
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-18-01
 ALL  ú ú 04 Page 401 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

AILERON POSITION TRANSMITTER
ZERO INDEX MARK
SEE A
2
FWD CRANK
WASHER NUT SCREW
1
TRANSMITTER
A
BRACKET
CONTROL RODCRANK SCREW
1 BRACKET POSITION TRANSMITTER AILERON BOLT WASHER NUT
TRANSMITTER
POSITION (2 LOCATIONS)
TRANSMITTER
86` SCREW
84` WASHER NUT
A
MOUNTING
BRACKET

ELECTRICAL
CONNECTOR

0.37 INCH
FWD INBD
A-A
AILERON POSITION
TRANSMITTER

A
1  MAKE SURE THAT THESE SCREWS ARE IN THE CORRECT TRANSMITTER GROVE
2  THE ZERO INDEX MARK MUST ALIGN WITH THE CENTERLINE OF THE CRANK
3  APPLY THE TAMPER-PROOF PUTTY AFTER THE POSITION TRANSMITTER IS ALIGNED
Aileron Position Transmitter Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-18-01
 ALL  ú ú 01 Page 402 ú Mar 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
 (b)  11J22 or 11J23, AILERON POS RIGHT
 S 214-006
 (3)  Make sure that the downlocks for the nose and main landing gear are installed (Ref 32-00-20).
 S 494-001
 WARNING:_______USE AMM 32-00-15/201 TO INSTALL THE DOOR LOCKS. THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (4)  
Open the doors for the main gear and install the door locks (Ref 32-00-15).

 S 984-007

 (5)  
Move the control wheels to their neutral position.

 S 864-008

 (6)  
Remove the power from the left, right, and center hydraulic systems (Ref 29-11-00).

 S 014-009

 (7)
Open access panel 561AB (left) or 661AB (right) (Ref 06-44-00).

 E.
Remove Aileron Position Transmitter (Fig. 401)

 S 034-010
 (1)
Disconnect the airplane connector from the position transmitter.

 S 034-011

 (2)  
Disconnect the control rod from the crank.

 S 024-013

 (3)  
If only the transmitter will be replaced, remove the screws that connect the transmitter to the transmitter bracket and remove the transmitter.

 S 024-012

 (4)  
Remove the bolts that connect the transmitter bracket to the mounting bracket, and remove the assembly.

 TASK 27-18-01-424-014
 3.  Install Aileron Position Transmitter____________________________________
 A. Equipment
 (1)  
Bonding Meter - Model T477W, Avtron
 Manufacturing Inc., Cleveland, Ohio

 B.
Consumable Materials

 (1)  
A00226 Putty, Tamperproof - BMS 8-45

 C.
References

 (1)  
06-44-00/201, Wing Access Doors and Panels

 (2)  
20-10-22/701, Metal Surface Cleaning/Painting

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-18-01
 ALL  ú ú 01 Page 403 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

 (3)  
24-22-00/201, Electrical Power - Control

 (4)  
27-18-00/501, Aileron Position Indicating System

 (5)  
32-00-15/201, Landing Gear Door Locks

 D.
Access

 (1)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(125)