曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1 Data Processing 
1.1 Introduction to Data Processing (DP)  1.1.1 Describe the system evolution and architecture  2  ICAO, national law, recording 
1.1.2 Describe, using an overall block schematic, the function and the performance of the systems  2  Generic FDP and RDP overall functional block diagrams 
1.1.3 Describe how the systems interface with other systems  2  Outline interconnecting systems (radars, displays, CFMU, AFTN, recording, communications) 
1.1.4 Define basic software functions/applications  1  FDP (IFPS, route processing, code/callsign, code allocation, strip distribution, track labelling) RDP (coordinate conversion, plot and track processing, MRP, STCA, track labelling) 
1.1.5 List the different operating systems which support current DP systems  1  e.g. AIX/UNIX, VMS, DOS/WIN, RMX 
1.1.6 Be aware of legal aspects  0  e.g. Copyright, configuration control, traceability and recording of data and actions 

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.2 System Software and Hardware Principles  1.2.1 Demonstrate a knowledge of current hardware and operating system (possibly part of pre-entry education)  2  Driver, interfaces, specific systems, e.g. UNIX, VMS, etc. Platforms (DEC Alpha, RISC6000, MBII, etc.) 
1.3 Radar/Surveillance Data Processing (RDP)  1.3.1 State ATC requirements  1  QoS, mandatory data recording, redundancy 
1.3.2 Explain the principles of radar data message processing  2  e.g. Single, multi-, plot, track 
1.3.3 Describe the functions of RDP  2  Recording, plot processing, track processing, multi-radar, limits and accuracy of MRT 
1.3.4 Describe the radar data inputs/outputs  2  tracks, plots, messages, code/callsign, time, control and monitoring, conflict alerts, FDP interface, maps, adaptation 
1.3.5 List future developments  1  Mode S and ADS, ARTAS tracker, CORA 
1.3.6 Describe the radar data monitoring functions (safety net, monitoring aids)  2  STCA, MTCD, MSAW 
1.4 Flight Data Processing (FDP)  1.4.1 State ATC requirements 1.4.2 Explain the functions of FDP  1 2  QoS, unambiguous, accurate, error free, timely Flight strip production, flight plan amendments, code/callsign correlation, flight progress monitoring, CIV/MIL coordination 
Page 28 Released Issue Edition Number: 2.0

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.4.3 Describe the inputs and outputs 1.4.4 Describe the basic software functions/ applications 1.4.5 List future developments 1.4.6 Describe FDP-RDP association, exchanges and updating  2 2 1 2  Flow control (CFMU/IFPS/FMP, ETFMS), flight strips / data displays, MRT, environmental data, static data, airspace adaptation, etc. FDP (IFPS, route processing, code/callsign, code allocation, strip distribution, track labelling) Very advanced systems (MTCD) Code/callsign / flight plan correlation, message exchanges, information update 
1.5 Operational Display System (ODS)  1.5.1 Describe the different display technologies 1.5.2 Be aware of HMI aspects 1.5.3 Describe the information displayed to the ODS HMI  2 0 2  Random scan / raster scan, common graphic display interface, CRT/LCD EUROCONTROL Standard HMI (ODID4) Country specific 
1.6 Miscellaneous Information  1.6.1 List the categories of other data used by ATC  1  System status / backup systems, clock, meteorological data, NOTAM, interfacing with adjacent centres, additional information, e.g. VDF, electronic briefing, etc. 
1.7 Analysis Tools  1.7.1 List  analysis tools  1  e.g. Possible malfunctions (SASS-C, SASS-S, RAPS, track and noise monitoring tools) 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Guidelines for a Common Basic Level of Technical Training fo(12)