TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.1.5 Explain the procedures required to verify that a service is fit to be returned to operational service  2  Service testing:- BITE, specific test procedures, manual verification of QoS Correct and clear notification of any ‘observations’ on the QoS duly documented 
1.1.6 State the legal requirements, company requirements, station requirements and norms of practice involved in working with operational systems  1  e.g. ICAO-mandated recording of speech circuits and the holding of recordings for 30 days, etc. National law requires that safe working practice is followed ESARR as appropriate, company rules 
1.1.7 Be aware of the scope or responsibility of an authorised person  0  Station log books, CMS system log-in, control authorisations, documentation, correct equipment operation, etc. Safety of personnel (self and others including ‘the public’, e.g. crane carrying parts over a public footpath or road) Safety of service Safety of equipment. 

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.1.8 Report on the performance of a maintenance task  2  Observe a team which is performing maintenance task following the approved procedures and techniques e.g. Correctly gain access to the site, informing the appropriate authority Establish permission and authority to work on the equipment Safely remove the equipment from service, perform the requisite maintenance Establish the correct functioning of the equipment and negotiate for it return to service Ensure that all procedures and documentation have been correctly completed, etc. 
1.1.9 State appropriate safety rules that apply in their organisation  1  e.g. Never work on high-voltage systems without a second person present, always ensure that colleagues are aware of your working and travel arrangements, etc. 

Subject 9: FACILITIES
The general objective is:
Learner shall describe facilities and define the level of performance required

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1 Facilities 
1.1 Power Supplies  1.1.1 Define the level of performance required from a power supply system in the ATM environment  1  Availability, quality, CoS, etc. 
1.1.2 Describe the main features of the current power supply systems  2  UPS systems, batteries and emergency generators, high voltage, earthing techniques, power provider(s) 
1.1.3 Be aware of safety regulations and procedures  0  Appropriate regulations of safety 
1.1.4 Describe the power distribution system at a typical ATM site  2  Power distribution redundancy, input, output, protections, measurements and monitoring, block schematic 
1.1.5 Explain precautions to be taken when working on equipment  2  Low and high voltage earthing techniques, protection devices 
1.1.6 State any appropriate ICAO, European or local regulations in force  1  ICAO regulations, local regulations and rules 
1.1.7 State the appropriate safety rules  1  Safe disposal of electronic components 
1.1.8 Describe the monitoring control systems  2  System management 

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.2 Air Conditioning  1.2.1 Describe, using an overall block schematic, the function, the appropriate terminology and the performance of current air conditioning systems in use  2  Air conditioning, water cooling, humidity control, air filtering system, visit to stations 
1.2.2 Describe methods employed to control operational environments  2  System management 
1.2.3 State the importance and criticality of maintaining a controlled environment  1  Importance of good environment, importance of cooling system for electronic equipment 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Guidelines for a Common Basic Level of Technical Training fo(16)