曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

1.2.4 State the appropriate safety rules  1  Safety tools characteristics 
1.3 Health and Safety  1.3.1 Be aware of personal safety responsibilities in the work environment  0  Safety statement, first aid, rules about climbing 
1.3.2 Be aware of potential hazards to health and safety generated by equipment, or contained within, the work environment  0  Health consequences of electric shock and static discharges, precautions with chemical products (batteries), mechanical hazards (rotating machinery/antennas), toxic materials (beryllium), biological hazards, etc. 
1.3.3 State safety procedures for the persons working on or near such an equipment  1 
1.3.4 State any applicable legal requirements  1  National, international regulations 
1.3.5 Define the fire alarm detection system  1  Alarm system management 
1.3.6 Describe main features and uses of the fire extinguishers  2 
Page 42 Released Issue Edition Number: 2.0

The general objective is:
Learner shall define SMC function and describe its basic principles

Subject 10: SYSTEM MONITORING AND CONTROL

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1 System Monitoring and Control (SMC) 
1.1 Overview of System Monitoring  1.1.1 Describe the principles and purpose of  2  Service requirements, boundaries of 
and Control (SMC) Function  the operational management of the technical services supporting the ATM system.  responsibility. Strategic and tactical responsibility, and demarcation. 
e.g. The strategic decision that two radars have to be available for a given ATC practice to be performed and the judgement that given radars are adequate for this purpose. The tactical decision that, given the current availability of radars, a radar can be released for maintenance. Hierarchy of authority both for the technical and ATC structures, and their interface. 

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.1.2 Describe the technical system  2  List subordinate systems, e.g. 
architecture of the SMC function and its subordinate systems  RADAR: Radar stations, communications, processing, display, etc. COMMUNICATIONS: TX/RX, circuit management, networks, HMI, standby facilities, recording, etc. NAVIGATION: NDB, VOR, ILS, DF, etc. DP: FDPS, data communications, etc. FACILITIES: Power, generators, UPS, battery, environmental (heating, cooling), fire and security, etc. 
1.1.3 Describe the transfer of responsibility  2  Operational and technical responsibility. 
for a service  Configuration and monitoring access and responsibility. 
1.2 System Configuration  1.2.1 Describe the range of configurations that can be used 1.2.2 Describe the techniques that are employed to make configuration changes  2  Equipment or channel switching, parameter setting (e.g. radar STC, polarisation, etc.), etc. HMI at high level on SMC, at low level on SMC, on subordinate HMI, physical switching. 

TOPIC SUBTOPIC  Objectives Students shall ....  L  CONTENT 
1.2.3 Describe procedures required to implements a planned major system change  Major system change, e.g. Activate new version of software in a subordinate system, transfer a service to a new system, change a database, etc. Authorisation, coordination, implementation plan, fallback strategies, etc. 
1.3 Monitoring and Control Functions  1.3.1 Describe the monitoring functions that are available  2  BITE, status, parameters, software and hardware watchdogs, etc. 
1.3.2 Describe the control functions that are available  2  Switching, parameters, set configurations, etc. 
1.3.3 Describe the management and coordination of the maintenance of all subordinate systems  2  Planned and unplanned Locally and externally managed Preventive and corrective 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Guidelines for a Common Basic Level of Technical Training fo(17)