曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

7) With the tensiometer, check cable tension — refer to 27-30-03.
8) If cable tension is incorrect, perform following operations :
a) Position immobilization tool (2) and screw in or out the turnbuckle barrel (1) to modify cable tension.
b) Set the trim tab control successively to "nose-down", "nose-up" and then to neutral position.
c) Check cable tension and repeat steps a) thru c) until you obtain the correct tension.
9) Lock the turnbuckle barrel (1) with lockwire.
10) Make sure all the tools and materials are removed and the work area is clean and free from debris.
11) Install compartment bottom door 242 and close baggage compartment door 219.
12) Close "AP CMPTR" and "AP SERVO" circuit breakers.
13) Remove the warning sign prohibiting main switch-breaker operation.
 

  1 - Turnbuckle barrel
2 - Immobilization tool

 
14221400AAACWZ24100 B38 pitch trim servo actuator — Cable tension adjustment
Figure 501

AW
Validity : KFC 225 KS 272C Page 502
22 12 06 (BA) NOV 01
 

 

　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TB20 MAINTENANCE MANUAL 22 AUTO FLIGHT TB20飛機維護手冊 22 自動飛行(55)