S 865-676

 (38)
 Put the TE switch in the NORM position to deactivate the TE flaps electric drive.

 NOTE:____The flaps will move to the 20-unit position. The slats will start to move to the fully extended position then reverse direction and stop at the intermediate position. The LEADING EDGE light and the EICAS message LE SLAT DISAGREE will go off.
 S 865-677
 (39) Put the LE switch in the ALTN position to activate the LE slats electric drive.
 NOTE: Permit time for the slats to get to the fully extended
____ position. The TRAILING EDGE light and the EICAS message TE FLAP DISAGREE will come on.
  ú

 31-51-00
 ALL  ú ú 15 Page 547 ú Jan 20/99

A

757
MAINTENANCE MANUAL

 S 865-678
 (40) Hold the CONFIG switch on the TEST panel in the T/O position.
 (a)  Make sure the red EICAS message, FLAPS, shows on the top display.
 S 865-679
 (41)
 Release the CONFIG switch.

 S 865-680

 (42)
 Put the FLAP lever in the 5-unit position.

 S 865-681

 (43)
 Make sure that the flaps and slats do not move.

 S 865-682

 (44)
 Put the LE switch in the NORM position to deactivate the LE slats electric drive.

 NOTE:____The flaps will move to the 5-unit position. The slats will move to the intermediate position. The TRAILING EDGE light and the EICAS message TE FLAP DISAGREE will go off.
 S 865-683
 (45)
 Put the ALTN FLAPS control in the NORM position.

 S 865-744

 (46)
 Make sure that the SPEED BRAKE lever is in the DOWN position.

 S 865-745

 (47)
 Hold the CONFIG switch on the TEST panel in the T/O position.

 (a)  Make sure the red EICAS message, SPOILERS, does not show on the top display when the EICAS COMPUTER switch is in the L and R positions.
 NOTE: The yellow EICAS message, SPOILERS, may show on the top
____ display if there is a fault in the spoiler system.
  ú

 31-51-00
 ALL  ú ú 07 Page 548 ú Sep 20/98

A

757
MAINTENANCE MANUAL

 S 865-746
 (48)
 Release the CONFIG switch.

 S 865-747

 (49)
 Put the SPEED BRAKE lever in the UP position.

 S 865-748

 (50)
 Hold the CONFIG switch on the TEST panel in the T/O position.

 (a)  
Make sure the CONFIG light comes on.

 (b)  
Make sure the WARNING lights come on.

 (c)  
Make sure the siren aural warning comes on.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 儀表 CHAPTER 31 - INSTRUMENTS 2(129)