E. EICAS Computer Test
 S 864-026
 (1)  
Supply electrical power (AMM 24-22-00/201).

 S 864-011

 (2)
Make sure that these circuit breakers on the P11 panel are closed:

 (a)  
11J2, EICAS CMPTR LEFT

 (b)  
11J3, EICAS UPPER IND or EICAS UPPER DISPLAY

 (c)  
11J29, EICAS CMPTR RIGHT

 (d)  
11J30, EICAS LOWER IND or EICAS LOWER DISPLAY

 (e)  
11J31, EICAS DISPLAY SW

 (f)  
11J32, EICAS PILOTS DSP or EICAS DISPLAY SELECT

 S 714-012
 (3)  
Turn the COMPUTER switch on the EICAS DISPLAY select panel to the L or R position as applicable.

 S 714-013

 (4)  
Make sure that the top display shows the primary engine page and the bottom display shows the secondary engine page.

 (5)  
Make sure that the parking brake is engaged.

 S 864-014
  ú

 31-41-02
 ALL  ú ú 08 Page 403 ú Jan 28/02

A

757
MAINTENANCE MANUAL

 S 744-015
 (6)  Push and release the TEST switch on the EICAS maintenance panel, P61.
 S 754-037
 (7)  Make sure that the TEST page shows on both displays.
 S 864-040
 (8)  Continue after the message TEST IN PROGRESS goes out of view.
 S 724-036
 (9)  If the message LEFT CMPTR FAIL or RIGHT CMPTR FAIL shows, do the steps that follow: (a) Make a record of all EICAS TEST page codes that are not zero. (b) Push and hold the ERASE switch on the EICAS MAINT panel. (c) Make sure that the message KEY ERASE shows. (d) Release the ERASE switch. (e) Push and hold the ERASE switch again. (f) At 3 seconds, make sure that the CMPTR FAIL message no longer shows.
 (g) (h) (i) (j)  Release the ERASE switch.Push and release the TEST switch to go out of the test mode.After 2 minutes, push and release the TEST switch again.Make sure that the CMPTR FAIL messages do not show.
 S 724-050

 (10)
 If the message X INTERNAL FAULTS shows, do the EICAS BITE procedure (FIM 31-41-00/101).

 S 754-057

 (11)
 Make sure that the EICAS program pin codes that follow show for the left (right) computer as applicable:

 (a) AD05 (A504)
 S 864-031
 (12)
 Turn the COMPUTER switch on the EICAS DISPLAY select panel to the other computer.

 S 754-032

 (13)
 Make sure that the EICAS program pin code for the other computer is correct.

 NOTE: The codes for both computers are given before this step.
____
  ú

 31-41-02
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 儀表 CHAPTER 31 - INSTRUMENTS 2(79)