TOTAL DTR 7.6

CHECK
APPR.

REQUIRED DTR

6

APPR.

D6-82669 8.2  FUSELAGE SSI INFORMATION Original
 PAGE F-31.5
F31B_PDF

THIS PAGE INTENTIONALLY LEFT BLANK
8.2  FUSELAGE SSI INFORMATION D6-82669 BLANK

N98152
F-32 - FUSELAGE BULKHEAD BS 1156
Original D6-82669 8.2  FUSELAGE SSI INFORMATION

F-32  INSPECTION INSTRUCTIONS  REFERENCES  ACCESS MANHOURS 
MPD  CPCP  OTHERS  INSP  MHRS  ELPSD 
TITLE:  FUSELAGE BULKHEAD BS 1156  S53-20-A  C53-701-01  I.(1)  0.5  0.5 

I.  INSPECTION OPTIONS - DTR CHECK FORM F-32 Hinge Support Beams at Hinge Pin, 1156 Bulkhead.
(1)
Hinge Support Beams and Doubler
(External) From Direction 1, using visual inspection methods.

Access: Through panel 9105, 9205 and removable inboard rib panel.
Zone(s): 701, 704.

(2)
Hinge Support Beams and Doubler

(External) From Direction 1, at specified locations using HFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-58). 0.25 elapsed hours and 0.25 manhours are required to accomplish this inspection.
Access: Same as I. (1).
Zone(s): Same as I. (1).
8.2   FUSELAGE SSI INFORMATION D6-82669 Original

Original D6-82669 8.2  FUSELAGE SSI INFORMATION THIS PAGE INTENTIONALLY LEFT BLANK

8.2  FUSELAGE SSI INFORMATION D6-82669 BLANK

N96994
F-33 - SHEAR TIED FRAMES BETWEEN BS 360 AND 540
Original D6-82669 8.2  FUSELAGE SSI INFORMATION

N96930
F-33 - SHEAR TIED FRAMES BETWEEN BS 360 AND 540 (Continued)
8.2  FUSELAGE SSI INFORMATION D6-82669 Original

F-33  INSPECTION INSTRUCTIONS  REFERENCES  ACCESS MANHOURS 
MPD  CPCP  OTHERS  INSP  MHRS  ELPSD 
TITLE:  SHEAR TIED FRAMES BETWEEN BS 360 AND 540  S53-14-A S53-18-A S53-22-A S53-22-E S53-22-H S53-22-J S53-28-A S53-28-B S53-28-E S53-30-A S53-30-C S53-30-D  C53-107-01 C53-202-01 C53-208-01 

I.  INSPECTION OPTIONS - DTR CHECK FORM F-33A Lower lobe frames between BS 360 and BS 540, stringer S-17L to S-17R.
(1) Inner Chord and Web
(Internal) From Direction 1, using visual inspection methods and at specified locations, using HFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-66).
Access:  Access doors 1103, 1201, 1601 (if installed), 3103, 3104, 3105, 3106, 4404.  Remove cargo liner S2082, S2084, floor boards S2085, insulation as required and, if installed, auxiliary fuel tank.
Zone(s):  205, 208, 210.
(2) Fail-Safe Chord
(Internal) From Direction 2, using visual inspection methods.

Access: Same as I. (1).
Zone(s): Same as I. (1).

Original  D6-82669 8.2  FUSELAGE SSI INFORMATION
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300/400/500 補(bǔ)充結(jié)構(gòu)檢查文件 SUPPLEMENTAL STRUCTURAL INSPECTION DOCUMENT 1(63)