II.  INSPECTION OPTIONS - DTR CHECK FROM F-33B Frames between BS 360 and BS 540 just below stringer S-17 at crease Beam web to frame attach clips.
(1) Web
(Internal) From Direction 1, at specified locations, using LFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-48 and 53-10-49). 2.0 elapsed hours and 2.0 manhours are required to accomplish these inspections.
Access:  Remove main cabin equipment, side wall panels S2082, S2084, floor panels S2085 and insulation, as required.
Zone(s):  107.
(2)
Fail-Safe Chord
(Internal) From Direction 2, using visual inspection methods.

Access: Same as II. (1).
Zone(s): Same as II. (1).

(3)
Inner Chord
(Internal) From Direction 3, using visual inspection methods.

Access: Same as II. (1).
Zone(s): Same as II. (1).

(4)
Inner Chord

(Internal) From Direction 4, at specified locations, using HFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-55). 2.0 elapsed hours and 2.0 manhours are required to accomplish this inspection.
Access:  Same as I. (1).
Zone(s):  Same as I. (1).
III.  INSPECTION OPTIONS - DTR CHECK FORM F-33C Frames between BS 360 and BS 540 from stringers S-13 to S-17.
(1) Inner Chord and Web
(Internal) From Direction 1, using visual inspection methods.

Access: Same as II. (1).
Zone(s): Same as II. (1).

8.2   FUSELAGE SSI INFORMATION D6-82669 Original

(2) Inner Chord and Web
(Internal) From Direction 4, at specified locations, using HFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-59). 2.0 elapsed hours and 2.0 manhours are required to accomplish this inspection.
Access: Same as II. (1).
Zone(s): Same as II. (1).
(3)
Fail-Safe Chord (Internal) From Direction 2, using visual inspection methods.

Access: Same as II. (1).
Zone(s): Same as II. (1).

(4)
Fail-Safe Chord

(Internal) From Direction 3, at specified locations, using HFEC (Ref. NDT Manual D6-37239, Part 6, 53-10-59). 2.0 elapsed hours and 2.0 manhours are required to accomplish this inspection.
Access: Same as II. (1).
Zone(s): Same as II. (1).
Original D6-82669 8.2  FUSELAGE SSI INFORMATION

8.2  FUSELAGE SSI INFORMATION D6-82669 Original

Original D6-82669 8.2  FUSELAGE SSI INFORMATION

8.2  FUSELAGE SSI INFORMATION D6-82669 Original

N96772
F-34 - SHEAR TIED FRAMES BETWEEN BS 727 AND 1016
Original D6-82669 8.2   FUSELAGE SSI INFORMATION

N96809
F-34 - SHEAR TIED FRAMES BETWEEN BS 727 AND 1016 (Continued)
8.2   FUSELAGE SSI INFORMATION D6-82669 Original

F-34  INSPECTION INSTRUCTIONS  REFERENCES  ACCESS MANHOURS 
MPD  CPCP  OTHERS  INSP  MHRS  ELPSD 
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300/400/500 補充結(jié)構(gòu)檢查文件 SUPPLEMENTAL STRUCTURAL INSPECTION DOCUMENT 1(64)