曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

select key will toggle modes or recall stored frequencies. The line select key, when pressed and
held for certain functions, allows the ADF and ATC memories to be recalled and to enter and exit
direct tune mode for the VHF COM and the VHF NAV.
GF0610_021
130.27
TEMP−1 TEMP−1
113.10
COM1 NAV1
118.00 112.00
ATC/TCAS ADF1
NB
ADF1
130.27
TEMP−1 TEMP−1
113.10
COM1 NAV1
118.00 112.00
ATC/TCAS
1200 1799.5
NB
1 ATC ALT ADF
Function Keys and Tuning Knobs
Function keys provide control of system data/configuration. The tuning knobs are used to modify
the data field inclosed by the cursor. This may be frequency or mode depending on the data field.
GF0610_022
TUNE CONTROL KNOBS
FUNCTION KEYS
COMMUNICATIONS
REV 51, Aug 14, 2006 Flight Crew Operating Manual
CSP 700−6
Volume 2
06−10−11
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys
Pressing the squelch key opens the COM radio squelch and allows any noise or signal
present in the radio to be heard in the audio system. The letters “SQ” are annunciated along the
top line of the VHF COM window (if the cursor is in the window) or the HF COM window (cursor in
the HF COM window)
The “SQ” for the HF-9000 toggles between “SQ OFF” and the previously selected “SQ” level (MIN,
MED, MAX). The “SQ” level is selected on the HF control page.
GF0610_024 130.27
TEMP−1 TEMP−1
113.10
NB SQ NAV1
ATC/TCAS ADF1
COM1
118.00 112.00
Pressing the key connects the RMU brightness control to the tuning knob and the RMU
brightness display will appear. The display brilliance is then adjustable using the “TUNE” control
knob on the RMU.
GF0610_026
TCAS DSPY1 HF1
130.27
TEMP−1 TEMP−1
113.10
COM1 NAV1
118.00 112.00
1605 620.0
ATC/TCAS ADF1
STANDBY ANT
NB
ANY KEY TO RETURN
TUNE TO DIM DISPLAY
COMMUNICATIONS
Flight Crew Operating Manual REV 41, Jul 08, 2004
CSP 700−6
Volume 2
06−10−12
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
Pressing the cross-side key, with the cursor in a window (except ATC /TCAS) display
transfers the entire RMU operation and display to the cross−side radio system. The legend colour
changes from white to magenta when the RMU is displaying and is in control of, data associated
with the cross−side system. Pressing the key with the cursor on the mode line of the
ATC-TCAS window and the transponder in other than STANDBY mode allows to switch between
transponder 1 and 2.
GF0610_028
COMMUNICATIONS
REV 51, Aug 14, 2006 Flight Crew Operating Manual
CSP 700−6
Volume 2
06−10−13
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
Pressing the page key once will change the RMU display to the Menu page. When not on
the radio tuning page (main or system page ), the RMU assigns a RETURN function to the lower
left line select key. Pressing this key returns the display to the radio tuning page.
GF0610_030
COM1
118.00
130.27
151.67
131.27
2
3
1 4
5
6
INSERT
DELETE
MORE
RETURN
MEMORIES
NB NARROW
BANDWIDTH
SELECT
RADIO PAGE
COM MEMORY
NAV MEMORY
ATC/TCAS
HF CONTROL
HF MEMORY
SYSTEM 1 PAGE MENU
Pressing the store key results in a temporary (TEMP) COM/NAV preselect frequency to be
stored in memory.
GF0610_032
130.27
TEMP−1 TEMP−1
113.10
ATC/TCAS ADF1
COM1 NAV1
118.00 112.00
NB
130.27
MEMORY−1 TEMP−1
113.10
ATC/TCAS ADF1
COM1 NAV1
118.00 112.00
NB
The temporary preselect frequency is assigned a numbered location, provided the cursor has been
first placed around that frequency or code.
COMMUNICATIONS
Flight Crew Operating Manual REV 41, Jul 08, 2004
CSP 700−6
Volume 2
06−10−14
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
While on the main tuning page, press the function key once to display the SYSTEM 1
PAGE MENU. Next press the line select key for the COM MEMORY to view the frequency held in
memory.
GF0610_033
COM1
118.00
130.27
2
3
1 4
5
6
INSERT
DELETE
MORE
RETURN
MEMORIES
NB NARROW
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰者手冊6(95)