曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Hawaii, Puerto Rico, and Virgin Islands
4. U.S. Gulf Coast VFR Aeronautical Chart.
The Gulf Coast Chart is designed primarily for
helicopter operation in the Gulf of Mexico area.
Information depicted includes offshore mineral
leasing areas and blocks, oil drilling platforms, and
high density helicopter activity areas. Scale 1 inch =
13.7nm/1:1,000,000. 55 x 27 inches folded to
5x10inches. Revised annually.
5. Grand Canyon VFR Aeronautical Chart.
Covers the Grand Canyon National Park area and is
designed to promote aviation safety, flight free zones,
and facilitate VFR navigation in this popular area.
The chart contains aeronautical information for
general aviation VFR pilots on one side and
commercial VFR air tour operators on the other side.
6. Helicopter Route Charts. A three-color
chart series which shows current aeronautical
information useful to helicopter pilots navigating in
areas with high concentrations of helicopter activity.
Information depicted includes helicopter routes, four
classes of heliports with associated frequency and
lighting capabilities, NAVAIDs, and obstructions. In
addition, pictorial symbols, roads, and easily
identified geographical features are portrayed.
Helicopter charts have a longer life span than other
chart products and may be current for several years.
All new editions of these charts are printed on a
durable plastic material. Helicopter Route Charts are
updated as requested by the FAA. Scale 1 inch =
1.71nm/1:125,000. 34 x 30 inches folded to
5x10inches.
b. IFR Navigation Charts.
1. IFR Enroute Low Altitude Charts
(Conterminous U.S. and Alaska). Enroute low
altitude charts provide aeronautical information for
navigation under IFR conditions below 18,000 feet
MSL. This four-color chart series includes airways;
limits of controlled airspace; VHF NAVAIDs with
frequency, identification, channel, geographic coordinates;
airports with terminal air/ground
communications; minimum en route and obstruction
clearance altitudes; airway distances; reporting
points; special use airspace; and military training
routes. Scales vary from 1 inch = 5nm to 1 inch =
20nm. 50 x 20 inches folded to 5 x 10 inches. Charts
revised every 56 days. Area charts show congested
terminal areas at a large scale. They are included with
subscriptions to any conterminous U.S. Set Low (Full
set, East or West sets).
(See FIG 9-1-2 and FIG 9-1-4.)
2/14/08 AIM
Types of Charts Available 9-1-3
FIG 9-1-2
Enroute Low Altitude Instrument Charts for the Conterminous U.S. (Includes Area Charts)
FIG 9-1-3
Enroute High Altitude Charts for the Conterminous U.S.
AIM 2/14/08
9-1-4 Types of Charts Available
2. IFR Enroute High Altitude Charts
(Conterminous U.S. and Alaska). Enroute high
altitude charts are designed for navigation at or above
18,000feet MSL. This four-color chart series
includes the jet route structure; VHF NAVAIDs with
frequency, identification, channel, geographic coordinates;
selected airports; reporting points. Scales
vary from 1 inch = 45nm to 1 inch = 18nm. 55 x 20
inches folded to 5 x 10 inches. Revised every 56 days.
(See FIG 9-1-3 and FIG 9-1-5.)
FIG 9-1-4
Alaska Enroute Low Altitude Chart
FIG 9-1-5
Alaskan Enroute High Altitude Chart
2/14/08 AIM
Types of Charts Available 9-1-5
3. U.S. Terminal Procedures Publication
(TPP). TPPs are published in 24 loose-leaf or
perfect bound volumes covering the conterminous
U.S., Puerto Rico and the Virgin Islands. A Change
Notice is published at the midpoint between revisions
in bound volume format and is available on the
internet for free download at the NACO web site.
(See FIG 9-1-9.) The TPPs include:
(a) Instrument Approach Procedure (IAP)
Charts. IAP charts portray the aeronautical data that
is required to execute instrument approaches to
airports. Each chart depicts the IAP, all related
navigation data, communications information, and an
airport sketch. Each procedure is designated for use
with a specific electronic navigational aid, such as
ILS, VOR, NDB, RNAV, etc.
(b) Instrument Departure Procedure (DP)
Charts. DP charts are designed to expedite
clearance delivery and to facilitate transition between
takeoff and en route operations. They furnish pilots'
departure routing clearance information in graphic
and textual form.
(c) Standard Terminal Arrival (STAR)
Charts. STAR charts are designed to expedite ATC
arrival procedures and to facilitate transition between
en route and instrument approach operations. They
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空信息手冊2008下(144)