曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Advance first edition (unedited) version – 30 August 2009
86
Topic Intermediate Objectives
The students should be able to:
Level Content
7.2 Surveillance/ Primary - Meteorology
1. Meteorological Radar 1)
2)
3)
List the main type of information
provided by weather radar
Describe the combining of a
weather channel in a surveillance
radar
State the characteristics of a
meteorological radar
1
2
1
Weather radar, wind profile radar,
windshear radar
Scan rate, polarization, limited
height estimation frequency
Range, power, scan rate, AE
type, Rx processing
7.3 Surveillance - SMR
1. Functional Safety of
SMR
1)
2)
State the role of ATSEP in safety
management routines and in
reporting processes
Describe, in terms of exposure
time and environment, the effect
on controller and pilot, relative to
the types of functional failures
1
2
Safety assessment
documentation related to SMR,
safety reports and occurrences,
safety monitoring
Total or partial failure. Premature
or delayed operational
implementation. Spurious and
intermittent failure or degradation.
Loss or corruption of data,
missing or incorrect input or
output (Ex: Ref: Safety policy and
implementation, ESARR)
2. Use of Radar for
Aerodrome Services
1) Define the operational
requirements of an SMR and
calculate the key parameters
necessary to achieve this
performance
2/3 Range, resolution, coverage,
update rate, probability of
detection, MTBF availability, PRF,
frequency, range W RT Tx power,
antenna gain, receiver MDS,
update rate
PD WRT resolution, PRF beamwidth,
PD WRT weather,
polarization
3. Radar Sensor 1)
2)
3)
4)
Draw and explain a layout of the
SMR sensor system
Describe the basic functions of the
receiver/transmitter unit
Describe how to operate a sensor
Describe the basic functions of the
antenna unit
1/2
2
2
Dual system, service display
Hardware/ function overview
Block diagram, timing relations,
video path, frequency agility,
frequency diversity, polarization,
controller structure
Hardware function overview,
control/switch unit, external
interface, azimuth encoding
4. SMR Display System 1)
2)
Describe the layout of the SMR
display system and its capabilities
Describe the basic functions of the
display SMR system
2
2
Hardware block diagram, software
structure, external interfaces
Video processing and tracking,
map creation and blanking
Advance first edition (unedited) version – 30 August 2009
87
Topic Intermediate Objectives
The students should be able to:
Level Content
3) Describe how to operate the
system
2 Sensor interface, scan to scan
correlator processor, identification
and alerting, display subsystem,
control and monitoring system
7.4 Surveillance/Secondary - SSR and M-SSR
1. Functional Safety of
SSR
1)
2)
State the role of ATSEP in safety
management routines and in
reporting processes
Describe the effect on the
controller and pilot, with respect to
the types of functional failures
1
2
Safety assessment
documentation related to
secondary surveillance system,
safety reports and occurrences,
safety monitoring
Total or partial failure. Premature
or delayed operational
implementation. Spurious and
intermittent failure or degradation.
Loss or corruption of data,
missing or incorrect input or
output (Ex: Ref: Safety policy and
implementation, ESARR)
2. Use of SSR for
En route Services 1)
2)
3)
Define the operational
requirements for an en route radar
and identify the key parameters
necessary to achieve this
performance
State the key parameters of an
en route secondary radar
Describe, in terms of exposure
time and environment, the effect
on controller and pilot relative to
the types of functional failures
1
1
2
Range, coverage, PD, resolution,
performance, update rate, PRF,
interface, rotational speed, power
budget
(uplink, downlink)
Ref ICAO Manual of the SSR
systems (Doc 9684)
Rotation rate, PRF, interface,
capacity
Total or partial failure. Premature
or delayed operational
implementation. Spurious and
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Air Traffic Safety Electronics Personnel (ATSEP)(44)